mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 08:49:09 +00:00
Dark98
11 lines
2.7 KiB
INI
11 lines
2.7 KiB
INI
[printer:*fdm_a250*]
|
|
inherits = *fdm_linear2*
|
|
name = *fdm_a250*
|
|
printer_notes = PRINTER_MODEL_SNAPMAKER_A250\n
|
|
start_gcode = ; Model: Snapmaker A250\n; Update: 20240428\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [physical_printer_preset]\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\nM104 S165\nM204 S100\nG28\nG0 Z153 F960.0\nG0 Y125.0 F3420.0\nG0 X115.0\n\nM190 R{first_layer_bed_temperature[initial_extruder]}\n\nG28\n{if 1==1}\n G0 X0\n G0 Z0.2 F960.0\n G0 Y0 F3420.0\n G0 X230\n G0 Y250\n G0 X0\n G0 Y0\n{endif}\n\nM83\n{if 1==1 && max(first_layer_bed_temperature[initial_extruder], bed_temperature[initial_extruder]) >= 90}\nG0 Z0.06 ;raise z to counteract thermal expansion\nG92 Z0 ;reset z\n{endif}\n\nT[initial_extruder]\nM104 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))}; common flush temp\nG0 Z1.6 F960.0\nG0 X{if initial_extruder == 0}100.0{else}130.0{endif} F3420.0\nG0 Y0 F3420.0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG1 E15 F80.0\nG92 E0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\n\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG1 E9.0 F200\nG92 E0\nG1 E6.0 Z4.6 F200\nG92 E0\n\nG0 Z5.6 F200\nM107\n\nG0 X{if initial_extruder == 0}55.0{else}175.0{endif} F3420.0\nG0 Z0.3 F960.0\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 E3 F200\nG92 E0\nG1 X{if initial_extruder == 0}0{else}230{endif} E3.42995 F3420.0\nG92 E0\n\nG1 E-{retract_length[initial_extruder]} F200\nG92 E0\nG0 Y20 F3420.0\n\n; ready [physical_printer_preset]
|
|
end_gcode = G92 E0\n\nG0 Z{max_layer_z + 2.0} F600\n; retract the filament to make it easier to replace\nG0 E-5 F200\nG28\n\n M104 S0\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
|
before_layer_gcode = ; layer: [layer_num]\nG92 E0
|
|
bed_shape = 0x0,230x0,230x250,0x250
|
|
max_print_height = 230
|
|
|