mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 16:59:21 +00:00
Dark98
49 lines
2.2 KiB
INI
49 lines
2.2 KiB
INI
[printer:SV01]
|
|
inherits = *common*
|
|
bed_shape = 0x0,280x0,280x240,0x240
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
deretract_speed = 0
|
|
end_gcode = G1 X5 Y200 F1000 ; \nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nM300; beep\n
|
|
extra_loading_move = -2
|
|
extruder_colour = #0080FF
|
|
gcode_flavor = marlin2
|
|
high_current_on_filament_swap = 0
|
|
machine_max_acceleration_e = 1000,5000
|
|
machine_max_acceleration_extruding = 500,1250
|
|
machine_max_acceleration_retracting = 500,1250
|
|
machine_max_acceleration_x = 500,1000
|
|
machine_max_acceleration_y = 500,1000
|
|
machine_max_acceleration_z = 100,200
|
|
machine_max_feedrate_e = 25,120
|
|
machine_max_feedrate_x = 300,200
|
|
machine_max_feedrate_y = 300,200
|
|
machine_max_feedrate_z = 5,12
|
|
machine_max_jerk_e = 5,2.5
|
|
machine_max_jerk_x = 10,10
|
|
machine_max_jerk_y = 10,10
|
|
machine_max_jerk_z = 0.4,0.4
|
|
machine_min_extruding_rate = 0,0
|
|
machine_min_travel_rate = 0,0
|
|
max_layer_height = 0.32
|
|
max_print_height = 300
|
|
min_layer_height = 0.1
|
|
nozzle_diameter = 0.4
|
|
parking_pos_retraction = 92
|
|
printer_settings_id =
|
|
printer_technology = FFF
|
|
remaining_times = 0
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_SOVOL\nPRINTER_MODEL_SV01\n
|
|
retract_layer_change = 0
|
|
retract_length = 2
|
|
retract_length_toolchange = 10
|
|
silent_mode = 0
|
|
start_gcode = G28 ; home all\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; \nG1 X5.1 Y10 Z0.3 F5000.0 ; Move to start position\nG1 X5.1 Y200 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X5.4 Y200 Z0.3 F5000.0 ; Move to side a little\nG1 X5.4 Y10 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z1.0 F3000 ;
|
|
use_relative_e_distances = 0
|
|
printer_model = SV01
|
|
default_print_profile = 0.20mm SPEED @SV01
|
|
thumbnails = 160x120
|
|
|
|
|