mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 00:39:44 +00:00
Dark98
39 lines
2.4 KiB
INI
39 lines
2.4 KiB
INI
[printer:*gCreate gMax 2*]
|
|
inherits = *common*
|
|
printer_model = GMAX2
|
|
#printer_variant = 0.5
|
|
max_layer_height = 0.7
|
|
min_layer_height = 0.15
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2
|
|
bed_shape = 0x0,457x0,457x457,0x457
|
|
max_print_height = 610
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 500
|
|
machine_max_acceleration_retracting = 1000
|
|
machine_max_acceleration_x = 600
|
|
machine_max_acceleration_y = 600
|
|
machine_max_acceleration_z = 15
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 8
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 8
|
|
machine_max_jerk_y = 8
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
#nozzle_diameter = 0.7
|
|
retract_before_travel = 2
|
|
retract_length = 0.75
|
|
retract_speed = 70
|
|
deretract_speed = 40
|
|
retract_before_wipe = 70%
|
|
default_print_profile = 0.20mm - Standard Layers @GCREATE
|
|
start_gcode = M420 Z20\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0
|
|
end_gcode = M104 S0 T0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+min(layer_z+70, max_print_height-10)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors
|
|
|
|
#[printer:*abl*]
|
|
#start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp#\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed #temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15.0 F1200.0 ; intro line\nG92 #E0.0
|
|
|