mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 16:59:21 +00:00
Dark98
54 lines
4.6 KiB
INI
54 lines
4.6 KiB
INI
[printer:*commonMK4*]
|
|
inherits = *common*
|
|
bed_shape = 0x0,250x0,250x210,0x210
|
|
max_print_height = 220
|
|
printer_variant = 0.4
|
|
printer_model = MK4
|
|
nozzle_diameter = 0.4
|
|
end_gcode = {if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X241 Y170 F3600 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+23, max_print_height)} F300 ; Move print head up{endif}\nG4 ; wait\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]
|
|
silent_mode = 1
|
|
machine_limits_usage = emit_to_gcode
|
|
machine_max_acceleration_e = 2500,2500
|
|
machine_max_acceleration_extruding = 2000,2000
|
|
machine_max_acceleration_retracting = 1200,1200
|
|
machine_max_acceleration_travel = 2000,2000
|
|
machine_max_acceleration_x = 2500,2500
|
|
machine_max_acceleration_y = 2500,2500
|
|
machine_max_acceleration_z = 200,200
|
|
machine_max_feedrate_e = 100,100
|
|
machine_max_feedrate_x = 200,160
|
|
machine_max_feedrate_y = 200,160
|
|
machine_max_feedrate_z = 40,40
|
|
machine_max_jerk_e = 10,10
|
|
machine_max_jerk_x = 8,8
|
|
machine_max_jerk_y = 8,8
|
|
machine_max_jerk_z = 2,2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
max_layer_height = 0.25
|
|
min_layer_height = 0.07
|
|
remaining_times = 1
|
|
printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK4\nPG
|
|
retract_lift_below = 219
|
|
retract_speed = 35
|
|
deretract_speed = 25
|
|
retract_before_travel = 1.5
|
|
retract_before_wipe = 80%
|
|
retract_layer_change = 1
|
|
retract_length = 0.8
|
|
start_gcode = M17 ; enable steppers\nM862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] A{(filament_abrasive[0] ? 1 : 0)} F{(nozzle_high_flow[0] ? 1 : 0)} ; nozzle check\nM115 U6.4.0+11974\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*MBL160.*/) ? 160 : (filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*MBL160.*/) ? 160 : (filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\nG1 X42 Y-4 Z5 F4800\n\nM302 S155 ; lower cold extrusion limit to 155C\n\n{if filament_type[initial_tool]=="FLEX"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\nG29 P9 X10 Y-4 W32 H4\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\n\nG0 Z40 F10000\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nM107\n\n;\n; MBL\n;\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X0 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\n\n; prepare for purge\nM104 S{first_layer_temperature[0]}\nG0 X0 Y-4 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[0]}\n\nG92 E0\nM569 S0 E ; set spreadcycle mode for extruder\n\n;\n; Extrude purge line\n;\nG92 E0 ; reset extruder position\nG1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E7 X15 Z0.2 F500 ; purge\nG0 X25 E4 F500 ; purge\nG0 X35 E4 F650 ; purge\nG0 X45 E4 F800 ; purge\nG0 X48 Z0.05 F8000 ; wipe, move close to the bed\nG0 X51 Z0.2 F8000 ; wipe, move quickly away from the bed\n\nG92 E0\nM221 S100 ; set flow to 100%
|
|
default_print_profile = 0.20mm QUALITY @MK4 0.4
|
|
default_filament_profile = "Prusament PLA @PG"
|
|
thumbnails = 16x16/QOI, 313x173/QOI, 480x240/QOI, 380x285/PNG
|
|
gcode_flavor = marlin2
|
|
high_current_on_filament_swap = 0
|
|
retract_lift = 0.2
|
|
binary_gcode = 1
|
|
travel_ramping_lift = 1
|
|
travel_slope = 1
|
|
travel_max_lift = 1.5
|
|
retract_length_toolchange = 0
|
|
extruder_clearance_height = 13
|
|
extruder_clearance_radius = 45
|
|
|