mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-08 00:41:08 +00:00
Dark98
84 lines
3.8 KiB
INI
84 lines
3.8 KiB
INI
[printer:Anycubic Kobra 2 Plus]
|
|
autoemit_temperature_commands = 1
|
|
bed_custom_model =
|
|
bed_custom_texture =
|
|
bed_shape = 0x0,330x0,330x330,0x330
|
|
rect_size_x = 330
|
|
rect_size_y = 330
|
|
before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm
|
|
between_objects_gcode =
|
|
color_change_gcode = M600
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
default_filament_profile = Anycubic PLA @KOBRA2 PLUS
|
|
default_print_profile = 0.2mm NORMAL @KOBRA2 PLUS
|
|
deretract_speed = 0
|
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.95} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM84; disable motors ; disable stepper motors
|
|
extra_loading_move = -2
|
|
extruder_colour = #FFFFFF
|
|
extruder_offset = 0x0
|
|
gcode_flavor = klipper
|
|
high_current_on_filament_swap = 0
|
|
host_type = octoprint
|
|
inherits =
|
|
layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm
|
|
machine_limits_usage = time_estimate_only
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 10000
|
|
machine_max_acceleration_retracting = 10000
|
|
machine_max_acceleration_travel = 3000,1250
|
|
machine_max_acceleration_x = 10000
|
|
machine_max_acceleration_y = 10000
|
|
machine_max_acceleration_z = 3000
|
|
machine_max_feedrate_e = 100
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 16
|
|
machine_max_jerk_e = 15
|
|
machine_max_jerk_x = 15
|
|
machine_max_jerk_y = 15
|
|
machine_max_jerk_z = 15
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
max_layer_height = 0.28
|
|
max_print_height = 400
|
|
min_layer_height = 0.08
|
|
nozzle_diameter = 0.4
|
|
parking_pos_retraction = 92
|
|
pause_print_gcode = M601
|
|
print_host =
|
|
printer_model = KOBRA2 PLUS
|
|
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_KOBRA2_PLUS
|
|
printer_settings_id =
|
|
printer_technology = FFF
|
|
printer_variant = 0.4
|
|
printer_vendor = Anycubic
|
|
printhost_apikey =
|
|
printhost_cafile =
|
|
remaining_times = 0
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 2.5
|
|
retract_length_toolchange = 1
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 0
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 80
|
|
silent_mode = 0
|
|
single_extruder_multi_material = 0
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; move X/Y/Z to min endstops\nG1 Z0.28 ; lift nozzle a bit \nG92 E0 \nG1 Y3 F2400 ; zero the extruded length \nG1 X180 E40 F500 ; Extrude 25mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-0.2 F3000 ; Retract a little \nG1 X181 F4000 ; Quickly wipe away from the filament line\nM117
|
|
template_custom_gcode =
|
|
thumbnails = 230x110
|
|
thumbnails_format = PNG
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 0
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 0
|
|
z_offset = 0
|
|
|