mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-08 00:41:08 +00:00
Dark98
92 lines
3.1 KiB
INI
92 lines
3.1 KiB
INI
[printer:Anycubic Kobra 3]
|
||
autoemit_temperature_commands = 0
|
||
bed_custom_model =
|
||
bed_custom_texture =
|
||
bed_shape = 0x0,250x0,250x250,0x250
|
||
before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm\nG92 E0
|
||
between_objects_gcode =
|
||
binary_gcode = 0
|
||
build_prepare_time = 249
|
||
color_change_gcode = M600
|
||
cooling_tube_length = 5
|
||
cooling_tube_retraction = 91.5
|
||
default_filament_profile = Anycubic PLA @KOBRA3
|
||
default_print_profile = 0.2mm NORMAL @KOBRA3
|
||
deretract_speed = 80,80,80,80
|
||
end_gcode = G1 X5 Y{print_bed_max[1]*0.95} F{travel_speed*60} ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM84; disable motors ; disable stepper motors
|
||
extra_loading_move = -2
|
||
extruder_colour = #FFFFFF;#FFEC3D;#EC008C;#212721
|
||
extruder_offset = 0x0,0x0,0x0,0x0
|
||
gcode_flavor = klipper
|
||
high_current_on_filament_swap = 0
|
||
host_type = octoprint
|
||
inherits =
|
||
is_mmu = 1
|
||
layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm
|
||
machine_limits_usage = time_estimate_only
|
||
machine_max_acceleration_e = 20000
|
||
machine_max_acceleration_extruding = 20000
|
||
machine_max_acceleration_retracting = 20000
|
||
machine_max_acceleration_travel = 3000,1250
|
||
machine_max_acceleration_x = 15000
|
||
machine_max_acceleration_y = 15000
|
||
machine_max_acceleration_z = 5000
|
||
machine_max_feedrate_e = 120
|
||
machine_max_feedrate_x = 600
|
||
machine_max_feedrate_y = 600
|
||
machine_max_feedrate_z = 10
|
||
machine_max_jerk_e = 10
|
||
machine_max_jerk_x = 20
|
||
machine_max_jerk_y = 20
|
||
machine_max_jerk_z = 5
|
||
machine_min_extruding_rate = 0
|
||
machine_min_travel_rate = 0
|
||
max_layer_height = 0.28,0.28,0.28,0.28
|
||
max_print_height = 260
|
||
min_layer_height = 0.12,0.12,0.12,0.12
|
||
multimaterial_purging = 140
|
||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||
parking_pos_retraction = 92
|
||
pause_print_gcode = M601
|
||
print_host =
|
||
printer_model = KOBRA3
|
||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_KOBRA3
|
||
printer_settings_id =
|
||
printer_technology = FFF
|
||
printer_variant = 0.4
|
||
printer_vendor =
|
||
printhost_apikey =
|
||
printhost_cafile =
|
||
remaining_times = 0
|
||
retract_before_travel = 1,1,1,1
|
||
retract_before_wipe = 0%,0%,0%,0%
|
||
retract_layer_change = 1,1,1,1
|
||
retract_length = 0.8,0.8,0.8,0.8
|
||
retract_length_toolchange = 1,1,1,1
|
||
retract_lift = 0.4,0.4,0.4,0.4
|
||
retract_lift_above = 0.3,0.3,0.3,0.3
|
||
retract_lift_below = 259.9,259.9,259.9,259.9
|
||
retract_restart_extra = 0,0,0,0
|
||
retract_restart_extra_toolchange = 0,0,0,0
|
||
retract_speed = 80,80,80,80
|
||
silent_mode = 0
|
||
single_extruder_multi_material = 0
|
||
start_gcode = G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05
|
||
template_custom_gcode =
|
||
thumbnails = 230x110/PNG
|
||
thumbnails_format = PNG
|
||
toolchange_gcode =
|
||
travel_lift_before_obstacle = 1,1,1,1
|
||
travel_max_lift = 0.4,0.4,0.4,0.4
|
||
travel_ramping_lift = 1,1,1,1
|
||
travel_slope = 10,10,10,10
|
||
use_firmware_retraction = 0
|
||
use_relative_e_distances = 1
|
||
use_volumetric_e = 0
|
||
variable_layer_height = 1
|
||
wipe = 1,1,1,1
|
||
z_offset = 0
|
||
|
||
|
||
|