Profiles/repos/orcaslicer-fff/Dremel/02.03.02.60.ini

[vendor]
repo_id = orcaslicer-fff
name = Dremel
config_version = 02.03.02.60
description = Dremel configurations
force_update = 0

[printer_model:Dremel 3D20]
nozzle_diameter = 0.4
family = Dremel
bed_model = dremel_3d20_buildplate_model.stl
bed_texture = 
hotend_model = 
machine_tech = FFF
model_id = Dremel_3D20
default_materials = Dremel Generic PLA @3D20 all

[printer_model:Dremel 3D40]
nozzle_diameter = 0.4
family = Dremel
bed_model = dremel_3d40_3d45_buildplate_model.stl
bed_texture = 
hotend_model = 
machine_tech = FFF
model_id = Dremel_3D40
default_materials = Dremel Generic PLA @3D40 all

[printer_model:Dremel 3D45]
nozzle_diameter = 0.4
family = Dremel
bed_model = dremel_3d45.stl
bed_texture = 
hotend_model = 
machine_tech = FFF
model_id = Dremel_3D45
default_materials = Dremel Generic PLA @3D45 all

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
support_chamber_temp_control = 0
support_air_filtration = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 500
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
z_hop_types = Normal Lift
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

default_print_profile = 0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle
machine_start_gcode = G0 Z20 F9000
G92 E0; G1 E-10 F1200
G28
M970 Q1 A10 B10 C130 K0
M970 Q1 A10 B131 C250 K1
M974 Q1 S1 P0
M970 Q0 A10 B10 C130 H20 K0
M970 Q0 A10 B131 C250 K1
M974 Q0 S1 P0
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G29 ;Home
G90;
G92 E0 ;Reset Extruder 
G1 Z2.0 F3000 ;Move Z Axis up 
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
M109 S205;
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder 
G1 X110 Y110 Z2.0 F3000 ;Move Z Axis up
machine_end_gcode = M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600; retract 
G91
G1 Z3;
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
M106 S0 ; turn off fan
G90 
G0 X110 Y200 F3600 
print_end

[printer:fdm_dremel_common]
inherits = fdm_machine_common
from = system
instantiation = false
gcode_flavor = marlin
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 500,500
machine_max_acceleration_retracting = 1000,1000
machine_max_acceleration_travel = 500,500
machine_max_acceleration_x = 500,500
machine_max_acceleration_y = 500,500
machine_max_acceleration_z = 500,500
machine_max_speed_e = 60,60
machine_max_speed_x = 500,500
machine_max_speed_y = 500,500
machine_max_speed_z = 10,10
machine_max_jerk_e = 5,5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 47
extruder_clearance_height_to_rod = 34
extruder_clearance_height_to_lid = 34
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 5
retract_length_toolchange = 2
z_hop = 0.4
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
deretraction_speed = 40
silent_mode = 0
single_extruder_multi_material = 1
change_filament_gcode = 
machine_pause_gcode = M25 ;pause print
wipe = 1
default_filament_profile = Dremel Generic PLA
bed_exclude_area = 0x0
machine_start_gcode = G90 ; use absolute coordinates
M83 ; extruder relative mode
M140 S[bed_temperature_initial_layer] ; set final bed temp
M104 S150 ; set temporary nozzle temp to prevent oozing during homing
G4 S10 ; allow partial nozzle warmup
G28 ; home all axis
G1 Z50 F240
G1 X2 Y10 F3000
M104 S[nozzle_temperature_initial_layer] ; set final nozzle temp
M190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize
M109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize
G1 Z0.28 F240
G92 E0
G1 Y140 E10 F1500 ; prime the nozzle
G1 X2.3 F5000
G92 E0
G1 Y10 E10 F1200 ; prime the nozzle
G92 E0
machine_end_gcode = {if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}
G1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print
{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}
{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}
M140 S0 ; turn off heatbed
M104 S0 ; turn off temperature
M107 ; turn off fan
M84 X Y E ; disable motors
layer_change_gcode = 
scan_first_layer = 0
nozzle_type = undefine
auxiliary_fan = 0

[printer:Dremel 3D20 0.4 nozzle]
inherits = fdm_dremel_common
from = system
setting_id = GM001
instantiation = true
printer_model = Dremel 3D20
printer_variant = 0.4
printer_structure = hbot
gcode_flavor = marlin
default_filament_profile = Dremel Generic PLA @3D20 all
default_print_profile = .20mm Standard @Dremel 3D20 0.4
nozzle_diameter = 0.4
printer_settings_id = Dremel
printable_area = 0x0,230x0,230x150,0x150
printable_height = 140
nozzle_type = undefine
auxiliary_fan = 0
deretraction_speed = 40
emit_machine_limits_to_gcode = 1
extruder_clearance_height_to_lid = 101
extruder_clearance_height_to_rod = 45
extruder_clearance_radius = 45
max_layer_height = 0.3
min_layer_height = 0.08
retract_before_wipe = 70%
retract_length_toolchange = 1
retract_lift_above = 0
retract_lift_below = 0
retract_lift_enforce = Top Only
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_when_changing_layer = 1
retraction_length = 0.5
retraction_minimum_travel = 2
retraction_speed = 40
wipe = 1
wipe_distance = 1
z_hop = 0.2
z_hop_types = Normal Lift
machine_max_acceleration_e = 6200,5000
machine_max_acceleration_extruding = 6200,20000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 9000,9000
machine_max_acceleration_x = 6200,20000
machine_max_acceleration_y = 6200,20000
machine_max_acceleration_z = 500,500
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 12,12
machine_max_jerk_y = 12,12
machine_max_jerk_z = 2,2
machine_max_speed_e = 3000,100
machine_max_speed_x = 1000,1000
machine_max_speed_y = 1000,1000
machine_max_speed_z = 30,30
machine_start_gcode = G90
G28
M132 X Y Z A
G1 Z100 F3300
G1 X-110.5 Y-74 F6000
M6 T0
M907 X100 Y100 Z60 A100
G1 Z0.6 F3300
G4 P2000
M108 T0
machine_end_gcode = M104 S0 T0
G1 Z140 F3300
G28 X0 Y0
M132 X Y Z A
G91
M18
thumbnails_format = PNG
thumbnails = 96x96,300x300

[printer:Dremel 3D40 0.4 nozzle]
inherits = fdm_dremel_common
from = system
setting_id = GM001
instantiation = true
printer_model = Dremel 3D40
printer_variant = 0.4
printer_structure = hbot
gcode_flavor = marlin
default_filament_profile = Dremel Generic PLA @3D40 all
default_print_profile = .20mm Standard @Dremel 3D40 0.4
nozzle_diameter = 0.4
printable_area = -127.5x-77.5,97.5x-77.5,97.5x77.5,-127.5x77.5
printable_height = 170
nozzle_type = undefine
auxiliary_fan = 0
max_layer_height = 0.34
min_layer_height = 0.05
emit_machine_limits_to_gcode = 1
enable_filament_ramming = 1
extra_loading_move = -2
extruder_clearance_height_to_lid = 101
extruder_clearance_height_to_rod = 45
extruder_clearance_radius = 45
fan_speedup_overhangs = 1
deretraction_speed = 40
printer_settings_id = Dremel
retract_when_changing_layer = 1
retraction_length = 3
retraction_minimum_travel = 5
retraction_speed = 60
retract_before_wipe = 70%
retract_length_toolchange = 1
retract_lift_enforce = Top Only
wipe = 1
wipe_distance = 1
z_hop = 0.5
z_hop_types = Normal Lift
machine_max_acceleration_e = 6200,5000
machine_max_acceleration_extruding = 6200,20000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 9000,9000
machine_max_acceleration_x = 6200,20000
machine_max_acceleration_y = 6200,20000
machine_max_acceleration_z = 500,500
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 12,12
machine_max_jerk_y = 12,12
machine_max_jerk_z = 2,2
machine_max_speed_e = 3000,100
machine_max_speed_x = 1000,1000
machine_max_speed_y = 1000,1000
machine_max_speed_z = 30,30
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
use_relative_e_distances = 0
machine_start_gcode = G90
G28
M132 X Y Z A
G1 Z100 F3300
G1 X-110.5 Y-74 F6000
M6 T0
M907 X100 Y100 Z60 A100
G1 Z0.6 F3300
G4 P2000
M108 T0
machine_end_gcode = M104 S0
M140 S0
G92 E1
G1 E-1 F300
G162 Z F600
G162 X Y F2000
M84
thumbnails_format = PNG
thumbnails = 96x96,300x300

[printer:Dremel 3D45 0.4 nozzle]
inherits = fdm_dremel_common
from = system
setting_id = GM001
instantiation = true
printer_model = Dremel 3D45
printer_variant = 0.4
printer_settings_id = Dremel
gcode_flavor = marlin
default_filament_profile = Dremel Generic PLA @3D45 all
default_print_profile = .20mm Standard @Dremel 3D45 0.4
nozzle_diameter = 0.4
printable_area = -127.5x-77.5,97.5x-77.5,97.5x77.5,-127.5x77.5
printable_height = 170
deretraction_speed = 40
emit_machine_limits_to_gcode = 1
enable_filament_ramming = 1
extra_loading_move = -2
wipe = 1
wipe_distance = 1
z_hop = 0.5
machine_max_acceleration_e = 10000,10000
machine_max_acceleration_extruding = 1500,1500
machine_max_acceleration_retracting = 1500,1500
machine_max_acceleration_x = 9000,9000
machine_max_acceleration_y = 9000,9000
machine_max_acceleration_z = 500,500
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 10,10
machine_max_jerk_y = 10,10
machine_max_jerk_z = 0.2,0.2
machine_max_speed_e = 120,120
machine_max_speed_x = 500,500
machine_max_speed_y = 500,500
machine_max_speed_z = 12,12
max_layer_height = 0.34
min_layer_height = 0.07
retraction_length = 1
retraction_minimum_travel = 2
retraction_speed = 40
use_relative_e_distances = 0
machine_start_gcode = G28; home printer
G1 Z50.00 F400; pruge line
G1 F200 E3
M132 X Y Z A; prepare printer
M907 X100 Y100 Z50 A100
machine_end_gcode = M104 S0; turn off nozzle
M140 S0; turn off bed
G92 E1; return print head to home
G1 E-1 F300
G162 Z F600
G162 X Y F2000
M84; disable stepper motors
machine_pause_gcode = G5
change_filament_gcode = G5

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
bridge_flow = 0.95
bridge_speed = 25
brim_width = 5
compatible_printers = 
print_sequence = by layer
default_acceleration = 10000
bridge_no_support = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.4
outer_wall_speed = 120
line_width = 0.45
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.42
initial_layer_print_height = 0.2
initial_layer_speed = 20
gap_infill_speed = 30
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 25%
sparse_infill_speed = 50
interface_shells = 0
detect_overhang_wall = 0
reduce_infill_retraction = 0
filename_format = {input_filename_base}.gcode
wall_loops = 3
inner_wall_line_width = 0.45
inner_wall_speed = 40
print_settings_id = 
raft_layers = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 2
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.45
internal_solid_infill_speed = 40
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
support_filament = 0
support_line_width = 0.42
support_interface_filament = 0
support_on_build_plate_only = 0
support_top_z_distance = 0.15
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0
support_interface_speed = 80
support_base_pattern = rectilinear
support_base_pattern_spacing = 2
support_speed = 40
support_threshold_angle = 30
support_object_xy_distance = 0.5
detect_thin_wall = 0
top_surface_line_width = 0.4
top_surface_speed = 30
travel_speed = 400
enable_prime_tower = 1
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0

[print:fdm_process_dremel_common]
inherits = fdm_process_common
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 25
brim_width = 5
brim_object_gap = 0.1
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 500
top_surface_acceleration = 500
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0
enable_arc_fitting = 0
outer_wall_line_width = 0.4
wall_infill_order = inner wall/outer wall/infill
line_width = 0.4
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_acceleration = 500
travel_acceleration = 700
inner_wall_acceleration = 500
initial_layer_line_width = 0.5
initial_layer_print_height = 0.2
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 23%
interface_shells = 0
ironing_flow = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = no ironing
layer_height = 0.2
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
inner_wall_line_width = 0.45
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 2
skirt_height = 1
skirt_loops = 1
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 0.4
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = default
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_filament = 0
support_line_width = 0.4
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 80
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_angle = 45
tree_support_wall_count = 0
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_surface_line_width = 0.4
top_shell_layers = 3
top_shell_thickness = 0.8
initial_layer_speed = 15
initial_layer_infill_speed = 20
outer_wall_speed = 25
inner_wall_speed = 40
internal_solid_infill_speed = 40
top_surface_speed = 30
gap_infill_speed = 30
sparse_infill_speed = 50
travel_speed = 150
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0

[print:.05mm Super Detail @Dremel 3D40 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 10
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 30
infill_direction = 45
initial_layer_line_width = 0.5
initial_layer_print_height = 0.05
initial_layer_speed = 22
infill_combination = 1
infill_wall_overlap = 15%
inner_wall_line_width = 0.45
inner_wall_speed = 40
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 40
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 15
line_width = 0.42
layer_height = 0.05
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.42
outer_wall_speed = 30
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 20%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.45
sparse_infill_speed = 45
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.42
support_top_z_distance = 0.1
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 40
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 45
support_threshold_angle = 30
support_object_xy_distance = 1.4
skirt_loops = 7
slow_down_layers = 2
support_bottom_z_distance = 0.1
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.42
top_surface_speed = 15
travel_speed = 100
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 10
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D40 0.4 nozzle

[print:.05mm Super Detail @Dremel 3D45 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 20
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 35
infill_direction = 45
initial_layer_line_width = 0.4
initial_layer_print_height = 0.05
initial_layer_speed = 25
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.4
inner_wall_speed = 50
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.4
internal_solid_infill_speed = 40
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 25
line_width = 0.4
layer_height = 0.05
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.4
outer_wall_speed = 35
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 20%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.4
sparse_infill_speed = 50
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.4
support_top_z_distance = 0.4
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 50
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 50
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.4
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.4
top_surface_speed = 35
travel_speed = 100
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 20
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D45 0.4 nozzle

[print:.10mm Detail @Dremel 3D20 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 6
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 5000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 45
infill_direction = 45
initial_layer_line_width = 0.4
initial_layer_print_height = 0.1
initial_layer_speed = 20
infill_combination = 1
infill_wall_overlap = 18%
inner_wall_line_width = 0.4
inner_wall_speed = 50
inner_wall_acceleration = 5000
internal_solid_infill_line_width = 0.4
internal_solid_infill_speed = 45
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 20
line_width = 0.4
layer_height = 0.1
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.4
outer_wall_speed = 30
outer_wall_acceleration = 2500
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 10%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 30%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.4
sparse_infill_speed = 45
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.4
support_top_z_distance = 0.4
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 50
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 3.5
support_speed = 45
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 3
slow_down_layers = 2
support_bottom_z_distance = 0.4
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.4
top_surface_speed = 45
travel_speed = 90
travel_acceleration = 5000
top_surface_pattern = monotonicline
top_surface_acceleration = 1000
top_shell_layers = 6
top_shell_thickness = 1
wall_distribution_count = 2
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D20 0.4 nozzle

[print:.10mm Detail @Dremel 3D40 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 10
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 55
infill_direction = 45
initial_layer_line_width = 0.5
initial_layer_print_height = 0.1
initial_layer_speed = 25
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.45
inner_wall_speed = 60
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 60
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 25
line_width = 0.42
layer_height = 0.1
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.42
outer_wall_speed = 35
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 20%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.45
sparse_infill_speed = 55
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.42
support_top_z_distance = 0.1
support_interface_top_layers = 2
support_interface_spacing = 0.68
support_interface_speed = 55
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.1
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.42
top_surface_speed = 35
travel_speed = 120
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 10
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D40 0.4 nozzle

[print:.10mm Detail @Dremel 3D45 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 10
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 35
infill_direction = 45
initial_layer_line_width = 0.4
initial_layer_print_height = 0.1
initial_layer_speed = 25
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.4
inner_wall_speed = 50
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.4
internal_solid_infill_speed = 40
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 25
line_width = 0.4
layer_height = 0.1
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.4
outer_wall_speed = 35
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 20%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.4
sparse_infill_speed = 50
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.4
support_top_z_distance = 0.4
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 50
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 50
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.4
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.4
top_surface_speed = 35
travel_speed = 100
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 10
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D45 0.4 nozzle

[print:.20mm Standard @Dremel 3D20 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 0.95
bridge_speed = 25
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 4
bottom_shell_thickness = 0
brim_object_gap = 0.1
default_acceleration = 5000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 50
infill_direction = 45
initial_layer_line_width = 0.42
initial_layer_print_height = 0.2
initial_layer_speed = 50
infill_combination = 1
infill_wall_overlap = 25%
inner_wall_line_width = 0.45
inner_wall_speed = 60
inner_wall_acceleration = 5000
internal_solid_infill_line_width = 0.4
internal_solid_infill_speed = 60
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = no ironing
initial_layer_infill_speed = 35%
line_width = 0.45
layer_height = 0.2
minimum_sparse_infill_area = 10
max_travel_detour_distance = 0
outer_wall_line_width = 0.45
outer_wall_speed = 60
outer_wall_acceleration = 2500
overhang_1_4_speed = 0
overhang_2_4_speed = 20
overhang_3_4_speed = 15
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 10%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 18%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.45
sparse_infill_speed = 60
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.38
support_top_z_distance = 0.3
support_interface_top_layers = 3
support_interface_spacing = 0.2
support_interface_speed = 100%
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 3.5
support_speed = 50
support_threshold_angle = 30
support_object_xy_distance = 60%
skirt_loops = 3
slow_down_layers = 2
support_bottom_z_distance = 0.4
support_interface_bottom_layers = 1
support_expansion = 1.5
top_surface_line_width = 0.4
top_surface_speed = 50
travel_speed = 100
travel_acceleration = 5000
top_surface_pattern = monotonicline
top_surface_acceleration = 1000
top_shell_layers = 4
top_shell_thickness = 0.8
wall_distribution_count = 2
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D20 0.4 nozzle

[print:.20mm Standard @Dremel 3D40 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 4
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 55
infill_direction = 45
initial_layer_line_width = 0.5
initial_layer_print_height = 0.1
initial_layer_speed = 25
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.45
inner_wall_speed = 60
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 60
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 25
line_width = 0.42
layer_height = 0.2
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.42
outer_wall_speed = 30
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 20%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.45
sparse_infill_speed = 55
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.42
support_top_z_distance = 0.4
support_interface_top_layers = 2
support_interface_spacing = 0.68
support_interface_speed = 55
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.4
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.42
top_surface_speed = 35
travel_speed = 120
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 4
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D40 0.4 nozzle

[print:.20mm Standard @Dremel 3D45 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 4
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 35
infill_direction = 45
initial_layer_line_width = 0.4
initial_layer_print_height = 0.1
initial_layer_speed = 25
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.4
inner_wall_speed = 60
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.4
internal_solid_infill_speed = 50
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 25
line_width = 0.4
layer_height = 0.2
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.4
outer_wall_speed = 30
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 20%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.4
sparse_infill_speed = 55
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.4
support_top_z_distance = 0.4
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 50
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 55
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.4
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.4
top_surface_speed = 35
travel_speed = 100
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 4
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D45 0.4 nozzle

[print:.30mm Draft @Dremel 3D20 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 6
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 5000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 50
infill_direction = 45
initial_layer_line_width = 0.4
initial_layer_print_height = 0.3
initial_layer_speed = 20
infill_combination = 1
infill_wall_overlap = 18%
inner_wall_line_width = 0.4
inner_wall_speed = 60
inner_wall_acceleration = 5000
internal_solid_infill_line_width = 0.4
internal_solid_infill_speed = 60
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 50
line_width = 0.4
layer_height = 0.3
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.4
outer_wall_speed = 60
outer_wall_acceleration = 2500
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 10%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 18%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.4
sparse_infill_speed = 60
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.4
support_top_z_distance = 0.3
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 50
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 3.5
support_speed = 50
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 3
slow_down_layers = 2
support_bottom_z_distance = 0.4
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.4
top_surface_speed = 50
travel_speed = 100
travel_acceleration = 5000
top_surface_pattern = monotonicline
top_surface_acceleration = 1000
top_shell_layers = 3
top_shell_thickness = 1
wall_distribution_count = 2
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D20 0.4 nozzle

[print:.30mm Draft @Dremel 3D40 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 10
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 55
infill_direction = 45
initial_layer_line_width = 0.5
initial_layer_print_height = 0.3
initial_layer_speed = 25
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.45
inner_wall_speed = 60
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 60
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 25
line_width = 0.42
layer_height = 0.3
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.42
outer_wall_speed = 60
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 20%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.45
sparse_infill_speed = 55
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.42
support_top_z_distance = 0.3
support_interface_top_layers = 2
support_interface_spacing = 0.68
support_interface_speed = 55
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.3
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.42
top_surface_speed = 55
travel_speed = 120
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 3
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D40 0.4 nozzle

[print:.30mm Draft @Dremel 3D45 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 10
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 35
infill_direction = 45
initial_layer_line_width = 0.4
initial_layer_print_height = 0.3
initial_layer_speed = 25
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.4
inner_wall_speed = 60
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.4
internal_solid_infill_speed = 50
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 25
line_width = 0.4
layer_height = 0.3
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.4
outer_wall_speed = 30
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 20%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.4
sparse_infill_speed = 55
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.4
support_top_z_distance = 0.6
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 50
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 55
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.6
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.4
top_surface_speed = 35
travel_speed = 100
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 3
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D45 0.4 nozzle

[print:.34mm SuperDraft @Dremel 3D40 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 10
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 55
infill_direction = 45
initial_layer_line_width = 0.5
initial_layer_print_height = 0.34
initial_layer_speed = 30
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.45
inner_wall_speed = 70
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 60
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 30
line_width = 0.42
layer_height = 0.34
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.42
outer_wall_speed = 70
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 10%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.45
sparse_infill_speed = 65
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.42
support_top_z_distance = 0.34
support_interface_top_layers = 2
support_interface_spacing = 0.68
support_interface_speed = 55
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 0.34
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.34
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.42
top_surface_speed = 55
travel_speed = 120
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 3
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D40 0.4 nozzle

[print:.34mm SuperDraft @Dremel 3D45 0.4]
inherits = fdm_process_dremel_common
from = system
instantiation = true
adaptive_layer_height = 0
bridge_flow = 1
bridge_speed = 50
brim_width = 5
bridge_no_support = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 10
bottom_shell_thickness = 1
brim_object_gap = 0.1
default_acceleration = 2000
detect_overhang_wall = 1
enable_support = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
gap_infill_speed = 35
infill_direction = 45
initial_layer_line_width = 0.48
initial_layer_print_height = 0.34
initial_layer_speed = 35
infill_combination = 1
infill_wall_overlap = 12%
inner_wall_line_width = 0.48
inner_wall_speed = 70
inner_wall_acceleration = 2000
internal_solid_infill_line_width = 0.56
internal_solid_infill_speed = 50
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 2000
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = top
initial_layer_infill_speed = 35
line_width = 0.48
layer_height = 0.34
minimum_sparse_infill_area = 15
max_travel_detour_distance = 0
outer_wall_line_width = 0.48
outer_wall_speed = 35
outer_wall_acceleration = 2000
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
print_sequence = by layer
reduce_infill_retraction = 1
raft_first_layer_density = 100%
raft_first_layer_expansion = 1.5
resolution = 0.012
sparse_infill_density = 10%
sparse_infill_pattern = crosshatch
sparse_infill_line_width = 0.56
sparse_infill_speed = 70
seam_position = aligned
skirt_distance = 2
skirt_height = 1
support_line_width = 0.48
support_top_z_distance = 0.68
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 55
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 60
support_threshold_angle = 30
support_object_xy_distance = 1
skirt_loops = 5
slow_down_layers = 2
support_bottom_z_distance = 0.68
support_interface_bottom_layers = 2
support_expansion = 1.5
top_surface_line_width = 0.48
top_surface_speed = 35
travel_speed = 100
travel_acceleration = 2000
top_surface_pattern = monotonicline
top_surface_acceleration = 2000
top_shell_layers = 3
top_shell_thickness = 1
wall_loops = 3
wall_infill_order = inner wall/outer wall/infill
wall_generator = arachne
compatible_printers = Dremel 3D45 0.4 nozzle

[filament:fdm_filament_common]
from = system
instantiation = false
overhang_fan_threshold = 95%
overhang_fan_speed = 100
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 1
reduce_fan_stop_start_freq = 0
fan_cooling_layer_time = 60
filament_cost = 0
filament_density = 0
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_retraction_minimum_travel = nil
filament_retract_before_wipe = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_z_hop = nil
filament_z_hop_types = nil
filament_retract_restart_extra = nil
filament_retraction_speed = nil
filament_settings_id = 
filament_soluble = 0
filament_type = PLA
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
bed_type = Cool Plate
nozzle_temperature_initial_layer = 200
full_fan_speed_layer = 0
fan_max_speed = 100
fan_min_speed = 35
slow_down_min_speed = 10
slow_down_layer_time = 8
filament_start_gcode = ; Filament gcode

nozzle_temperature = 200
temperature_vitrification = 100

[filament:fdm_filament_pla]
inherits = fdm_filament_common
from = system
instantiation = false
fan_cooling_layer_time = 100
filament_max_volumetric_speed = 12
filament_type = PLA
filament_density = 1.24
filament_cost = 20
nozzle_temperature_initial_layer = 220
reduce_fan_stop_start_freq = 1
slow_down_for_layer_cooling = 1
fan_max_speed = 100
fan_min_speed = 100
overhang_fan_speed = 100
overhang_fan_threshold = 50%
close_fan_the_first_x_layers = 1
nozzle_temperature = 220
temperature_vitrification = 60
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 230
slow_down_min_speed = 10
slow_down_layer_time = 4
additional_cooling_fan_speed = 70
filament_start_gcode = ; filament start gcode

[filament:Dremel Generic PLA]
inherits = fdm_filament_pla
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
filament_flow_ratio = 0.98
filament_max_volumetric_speed = 12
slow_down_layer_time = 8
compatible_printers = Dremel 3D45 0.4 nozzle,Dremel 3D40 0.4 nozzle,Dremel 3D20 0.4 nozzle

[filament:Dremel Generic PLA @3D20 all]
inherits = Dremel Generic PLA
from = system
setting_id = GFSL99_00
instantiation = true
filament_max_volumetric_speed = 9
slow_down_layer_time = 10
filament_retraction_length = 3
filament_retraction_speed = 60
nozzle_temperature = 225
nozzle_temperature_initial_layer = 230
nozzle_temperature_range_high = 230
compatible_printers = Dremel 3D20 0.4 nozzle

[filament:Dremel Generic PLA @3D40 all]
inherits = Dremel Generic PLA
from = system
setting_id = GFSL99_00
instantiation = true
filament_max_volumetric_speed = 9
slow_down_layer_time = 10
filament_retraction_length = 3
filament_retraction_speed = 60
hot_plate_temp_initial_layer = 60
hot_plate_temp = 60
nozzle_temperature = 225
nozzle_temperature_initial_layer = 225
nozzle_temperature_range_high = 230
compatible_printers = Dremel 3D40 0.4 nozzle

[filament:Dremel Generic PLA @3D45 all]
inherits = Dremel Generic PLA
from = system
setting_id = GFSL99_00
instantiation = true
slow_down_min_speed = 10
close_fan_the_first_x_layers = 3
filament_loading_speed_start = 3
filament_loading_speed = 28
filament_unloading_speed_start = 100
filament_unloading_speed = 90
filament_cooling_moves = 4
filament_cooling_initial_speed = 2.2
filament_cooling_final_speed = 3.4
filament_retraction_length = 3
filament_retraction_speed = 60
nozzle_temperature = 200
nozzle_temperature_initial_layer = 200
compatible_printers = Dremel 3D45 0.4 nozzle