mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 08:50:02 +00:00
Dark98
39 lines
1002 B
INI
39 lines
1002 B
INI
[print:*M1_speed*]
|
|
# Print presets for high-speed printers.
|
|
inherits = *common*
|
|
top_solid_layers = 3
|
|
bottom_solid_layers = 3
|
|
gap_fill_enabled = 0
|
|
default_acceleration = 3000
|
|
travel_acceleration = 3000
|
|
perimeter_speed = 100
|
|
external_perimeter_speed = 60%
|
|
solid_infill_speed = 50%
|
|
infill_speed = 250
|
|
top_solid_infill_speed = 20%
|
|
support_material_speed = 100
|
|
support_material_interface_speed = 50%
|
|
brim_speed = 30%
|
|
bridge_speed = 120
|
|
bridge_speed_internal = 120%
|
|
overhangs_speed = 120%
|
|
gap_fill_speed = 100
|
|
gap_fill_flow_match_perimeter = 0
|
|
thin_walls_speed = 100%
|
|
ironing_speed = 75%
|
|
travel_speed = 250
|
|
travel_speed_z = 0
|
|
first_layer_min_speed = 0
|
|
first_layer_speed = 30
|
|
first_layer_infill_speed = 0
|
|
first_layer_speed_over_raft = 30
|
|
small_perimeter_speed = 65%
|
|
max_print_speed = 250
|
|
max_volumetric_speed = 12
|
|
max_volumetric_extrusion_rate_slope_negative = 0
|
|
max_volumetric_extrusion_rate_slope_positive = 0
|
|
small_perimeter_min_length = 8
|
|
small_perimeter_max_length = 25.1327
|
|
solid_infill_below_area = 0
|
|
|