mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 16:59:47 +00:00
Dark98
46 lines
1.5 KiB
INI
46 lines
1.5 KiB
INI
[filament:PunkFil PETG CF 10 VC3 @RatRig]
|
|
filament_vendor = RatRig
|
|
filament_type = PETG
|
|
bed_temperature = 80
|
|
bridge_fan_speed = 40
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
end_filament_gcode = ;Filament-specific end gcode \n;END gcode for filament\n"
|
|
extrusion_multiplier = 0.93
|
|
fan_always_on = 0
|
|
filament_colour = #323232
|
|
filament_cost = 48
|
|
filament_density = 1.27
|
|
filament_diameter = 1.75
|
|
filament_enable_toolchange_part_fan = 0
|
|
filament_enable_toolchange_temp = 0
|
|
filament_load_time = 0
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_max_speed = 250
|
|
filament_max_volumetric_speed = 20
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_notes = ""
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_retract_layer_change = 1
|
|
filament_retract_length = 0.8
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
filament_spool_weight = 1000
|
|
filament_unload_time = 0
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_wipe = nil
|
|
first_layer_bed_temperature = 80
|
|
full_fan_speed_layer = 0
|
|
max_fan_speed = 0
|
|
min_fan_speed = 0
|
|
min_print_speed = 20
|
|
fan_below_layer_time = 5
|
|
slowdown_below_layer_time = 12
|
|
start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.038"
|
|
temperature = 230
|
|
first_layer_temperature = 230
|
|
compatible_printers_condition = printer_model=~/.*VC3_300*/ or printer_model=~/.*VC3_400*/ or printer_model=~/.*VC3_500*/ or printer_notes=~/.*VCore4XYsettings*/
|
|
|