mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 08:49:09 +00:00
Dark98
26 lines
7.4 KiB
INI
26 lines
7.4 KiB
INI
[printer:*fdm_a400*]
|
|
inherits = *fdm_linear2_dual*
|
|
name = *fdm_a400*
|
|
extruder_clearance_height_to_rod = 32
|
|
extruder_clearance_height_to_lid = 400
|
|
machine_max_acceleration_x = 5000
|
|
machine_max_acceleration_y = 5000
|
|
machine_max_acceleration_z = 200
|
|
machine_max_acceleration_travel = 5000
|
|
machine_max_acceleration_extruding = 5000
|
|
machine_max_acceleration_retracting = 2000
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 3
|
|
thumbnails = 600x600
|
|
printer_notes = PRINTER_MODEL_SNAPMAKER_ARTISAN\nPRINTER_MODEL_SNAPMAKER_A400_DUAL\n
|
|
start_gcode = ; Model: Snapmaker Artisan ({nozzle_diameter[0]}/{nozzle_diameter[1]})\n; Update: 20240428\n; Maintained by https://github.com/macdylan/3dp-configs\n; Printer : [printer_preset]\n; Profile : [print_preset]\n; Plate : [physical_printer_preset]\n; --- initial_extruder: [initial_extruder]\n; --- has_wipe_tower: [has_wipe_tower]\n; --- total_toolchanges: [total_toolchanges]\n; --- T0: {is_extruder_used[0]}\n; --- T1: {is_extruder_used[1]}\n\nM201 X[machine_max_acceleration_x] Y[machine_max_acceleration_y] Z[machine_max_acceleration_z] E[machine_max_acceleration_e]\nM203 X[machine_max_feedrate_x] Y[machine_max_feedrate_y] Z[machine_max_feedrate_z] E[machine_max_feedrate_e]\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM205 X[machine_max_jerk_x] Y[machine_max_jerk_y] Z[machine_max_jerk_z] E[machine_max_jerk_e]\n\nT[initial_extruder]\n\nM205 V[machine_max_jerk_x] ;Junction Deviation (mm)\n\nM140 S{first_layer_bed_temperature[initial_extruder]}\n\n; you can clean the nozzle\n{if is_extruder_used[0]}M104 T0 S165{endif}\n{if is_extruder_used[1]}M104 T1 S165{endif}\nM204 S100\nG28\nG0 Z266 F960.0\nG0 Y200.0 F6840.0\nG0 X200.0\n\n{if first_layer_print_min[0] >= 70 && first_layer_print_max[0] <= 330 && first_layer_print_min[1] >= 70 && first_layer_print_max[1] <= 330}\nM190 P0 R{first_layer_bed_temperature[initial_extruder]} ;only inner part of the bed\n{else}\nM190 R{first_layer_bed_temperature[initial_extruder]}\n{endif}\n\nG28\n{if 1==1}\n G0 X0\n G0 Z0.2 F960.0\n G0 Y0 F6840.0\n G0 X400\n G0 Y400\n G0 X0\n G0 Y0\n{endif}\n\nM83\n{if 1==1 && max(first_layer_bed_temperature[initial_extruder], bed_temperature[initial_extruder]) >= 90}\nG0 Z0.06 ;raise z to counteract thermal expansion\nG92 Z0 ;reset z\n{endif}\n\n{if is_extruder_used[0]}M104 T0 S{max(250, min(290, first_layer_temperature[0] + 15))}{endif}\n{if is_extruder_used[1]}M104 T1 S{max(250, min(290, first_layer_temperature[1] + 15))}{endif}\n\n{if is_extruder_used[0] and initial_extruder != 0}\n T0\nM104 S{max(250, min(290, first_layer_temperature[0] + 15))}; common flush temp\nG0 Z1.6 F960.0\nG0 X{if 0 == 0}185.0{else}215.0{endif} F6840.0\nG0 Y0 F6840.0\n\nM109 S{max(250, min(290, first_layer_temperature[0] + 15))} C2 W1; common flush temp\nG1 E20 F80.0\nG92 E0\n\nM106 S{min(255, (max_fan_speed[0] + 10) * 2.55)}\n\nM104 S{first_layer_temperature[0] + 5}\n\nG1 E12.0 F200\nG92 E0\nG1 E8.0 Z4.6 F200\nG92 E0\n\nG0 Z5.6 F200\nM107\n\nG0 X{if 0 == 0}140.0{else}260.0{endif} F6840.0\nG0 Z0.3 F960.0\nM109 S{first_layer_temperature[0]} C3 W1\nG1 E3 F200\nG92 E0\nG1 X{if 0 == 0}0{else}400{endif} E8.73079 F6840.0\nG92 E0\n\nG1 E-{retract_length_toolchange[0]} F200\nG92 E0\nG0 Y20 F6840.0\n\n M104 S{is_nil(idle_temperature[0]) ? temperature[0] + standby_temperature_delta : idle_temperature[0]}\n{endif}\n{if is_extruder_used[1] and initial_extruder != 1}\n T1\nM104 S{max(250, min(290, first_layer_temperature[1] + 15))}; common flush temp\nG0 Z1.6 F960.0\nG0 X{if 1 == 0}185.0{else}215.0{endif} F6840.0\nG0 Y0 F6840.0\n\nM109 S{max(250, min(290, first_layer_temperature[1] + 15))} C2 W1; common flush temp\nG1 E20 F80.0\nG92 E0\n\nM106 S{min(255, (max_fan_speed[1] + 10) * 2.55)}\n\nM104 S{first_layer_temperature[1] + 5}\n\nG1 E12.0 F200\nG92 E0\nG1 E8.0 Z4.6 F200\nG92 E0\n\nG0 Z5.6 F200\nM107\n\nG0 X{if 1 == 0}140.0{else}260.0{endif} F6840.0\nG0 Z0.3 F960.0\nM109 S{first_layer_temperature[1]} C3 W1\nG1 E3 F200\nG92 E0\nG1 X{if 1 == 0}0{else}400{endif} E8.73079 F6840.0\nG92 E0\n\nG1 E-{retract_length_toolchange[1]} F200\nG92 E0\nG0 Y20 F6840.0\n\n M104 S{is_nil(idle_temperature[1]) ? temperature[1] + standby_temperature_delta : idle_temperature[1]}\n{endif}\n\nT[initial_extruder]\nM104 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))}; common flush temp\nG0 Z1.6 F960.0\nG0 X{if initial_extruder == 0}185.0{else}215.0{endif} F6840.0\nG0 Y0 F6840.0\n\nM109 S{max(250, min(290, first_layer_temperature[initial_extruder] + 15))} C2 W1; common flush temp\nG1 E20 F80.0\nG92 E0\n\nM106 S{min(255, (max_fan_speed[initial_extruder] + 10) * 2.55)}\n\nM104 S{first_layer_temperature[initial_extruder] + 5}\n\nG1 E12.0 F200\nG92 E0\nG1 E8.0 Z4.6 F200\nG92 E0\n\nG0 Z5.6 F200\nM107\n\nG0 X{if initial_extruder == 0}140.0{else}260.0{endif} F6840.0\nG0 Z0.3 F960.0\nM109 S{first_layer_temperature[initial_extruder]} C3 W1\nG1 E3 F200\nG92 E0\nG1 X{if initial_extruder == 0}0{else}400{endif} E8.73079 F6840.0\nG92 E0\n\nG1 E-{retract_length[initial_extruder]} F200\nG92 E0\nG0 Y20 F6840.0\n\n; ready [physical_printer_preset]
|
|
end_gcode = G92 E0\n\nG0 Z{max_layer_z + 2.0} F600\n; retract the filament to make it easier to replace\nG0 E-10 F200\nG28\n\n {if is_extruder_used[0]}M104 T0 S0{endif}\n {if is_extruder_used[1]}M104 T1 S0{endif}\nM140 S0\nM107\nM220 S100\nM84\n\n;\n; DON'T REMOVE these lines if you're using the smfix (https://github.com/macdylan/SMFix)\n; min_x = [first_layer_print_min_0]\n; min_y = [first_layer_print_min_1]\n; max_x = [first_layer_print_max_0]\n; max_y = [first_layer_print_max_1]\n; max_z = [max_layer_z]\n; total_layer_number = [layer_num]\n;
|
|
toolchange_gcode = ;***** Update: 20231010\n{if current_extruder != next_extruder }\n; Change T[current_extruder] -> T[next_extruder] (layer:[layer_num] tc:[total_toolchanges])\n{if has_wipe_tower}\nG1 E-{retract_length_toolchange[current_extruder]} X{wipe_tower_x} Y{wipe_tower_y} F{travel_speed*60}\n{else}\nG1 E-{retract_length_toolchange[current_extruder]} F{retract_speed[current_extruder]*60}\n{endif}\nT{next_extruder}\n\nM107 P[current_extruder] ;fan off T[current_extruder]\nM104 T[current_extruder] S{is_nil(idle_temperature[current_extruder]) ? temperature[current_extruder] + standby_temperature_delta : idle_temperature[current_extruder]} ;standby T[current_extruder]\n\n{if layer_num == 1 &&\n ((filament_type[current_extruder] == "PLA" || filament_type[current_extruder] == "TPU")\n || (filament_type[next_extruder] == "PLA" || filament_type[next_extruder] == "TPU"))\n}\n; set bed temp: {filament_type[current_extruder]}({bed_temperature[current_extruder]}) -> {filament_type[next_extruder]}({bed_temperature[next_extruder]})\nM140 S{min(bed_temperature[current_extruder], bed_temperature[next_extruder])}\n{endif}\n\nM109 T[next_extruder] S{layer_num < 1 ? first_layer_temperature[next_extruder] : temperature[next_extruder]} C3 W1 ;wait T{next_extruder}\n{if layer_num >= disable_fan_first_layers[next_extruder]}\n M106 P[next_extruder] S{min_fan_speed[next_extruder] * 255.0 / 100.0} ; restore fan speed for T[next_extruder]\n{endif}\nG1 E{retract_length_toolchange[next_extruder]} F100\n\n{if layer_z <= (first_layer_height + 0.001)}\n M204 S[first_layer_acceleration] ;first layer accel\n{elsif default_acceleration > 0}\n M204 S[default_acceleration] ;default accel\n{endif}\n\n{endif}
|
|
before_layer_gcode = ; layer: [layer_num]\nG92 E0
|
|
bed_shape = 0x0,400x0,400x400,0x400
|
|
max_print_height = 400
|
|
machine_max_feedrate_x = 300
|
|
machine_max_feedrate_y = 300
|
|
|