mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 16:59:47 +00:00
Dark98
20 lines
1.1 KiB
INI
20 lines
1.1 KiB
INI
[printer:SV01 0.8 nozzle]
|
|
inherits = SV01
|
|
nozzle_diameter = 0.8
|
|
max_layer_height = 0.6
|
|
min_layer_height = 0.2
|
|
printer_variant = 0.8
|
|
retract_length = 0.7
|
|
retract_speed = 40
|
|
deretract_speed = 23
|
|
retract_lift = 0.25
|
|
start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28;\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X5.1 Y30.0 Z0.28 F1500.0 E1 ;Draw a short bit in case the extruder turns in the wrong direction\nG1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up
|
|
default_print_profile = 0.40mm QUALITY @0.8 nozzle SV01
|
|
default_filament_profile = Generic PLA 0.8 @SOVOL
|
|
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
|
|
|
|
# XXXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- SV01 PRO---XXX
|
|
# XXXXXXXXXXXXXXXXXXXXX
|
|
|