Profiles/profile_sources/non-prusa-fff/Ultimaker/printer/_sline_.ini

[printer:*sline*]
printer_model = ULTIMAKERSline
extruder_offset = 0x0,22x0
printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ULTIMAKER\nPRINTER_MODEL_ULTIMAKERSline
toolchange_gcode = {if previous_extruder>= 0}\nM104 S{temperature[previous_extruder] + standby_temperature_delta}\n{endif}\n\nM104 T{next_extruder} S{temperature[next_extruder]}\n\nG91\nG0 Z2\nG90\nM82\n\nT{next_extruder}\nM109 S{temperature[next_extruder]}\n\nG91\nG0 Z-2\nG90\nM82\nG92 E0 ; reset extrusion distance
start_gcode = ; Delete the first 'generated by PrusaSlicer' line to make gcode printable on Ultimaker S-line\n\n;START_OF_HEADER\n; Printer_Settings_ID: [printer_settings_id]\n\n;ULTIMAKER GRIFFIN HEADER\n;HEADER_VERSION:0.1\n;FLAVOR:Griffin\n;GENERATOR.NAME:PrusaSlicer\n;GENERATOR.VERSION:5.4.0\n;GENERATOR.BUILD_DATE:{year}-{month}-{day}\n;TARGET_MACHINE.NAME:Ultimaker S7\n;EXTRUDER_TRAIN.0.INITIAL_TEMPERATURE:{first_layer_temperature[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.VOLUME_USED:{extruded_volume[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.GUID:0f12978a-8e3c-4147-b9ca-726d5ed59368\n;EXTRUDER_TRAIN.0.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.0.NOZZLE.NAME:AA {nozzle_diameter[0]}\n;EXTRUDER_TRAIN.1.INITIAL_TEMPERATURE:{temperature[1] + standby_temperature_delta}\n;EXTRUDER_TRAIN.1.MATERIAL.VOLUME_USED:{extruded_volume[1]}\n;EXTRUDER_TRAIN.1.MATERIAL.GUID:0f12978a-8e3c-4147-b9ca-726d5ed59368\n;EXTRUDER_TRAIN.1.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.1.NOZZLE.NAME:AA {nozzle_diameter[0]}\n;BUILD_PLATE.INITIAL_TEMPERATURE:[first_layer_bed_temperature]\n;BUILD_VOLUME.TEMPERATURE:28\n;PRINT.TIME:0\n;PRINT.GROUPS:1\n;PRINT.SIZE.MIN.X:{print_bed_min[0]}\n;PRINT.SIZE.MIN.Y:{print_bed_min[1]}\n;PRINT.SIZE.MIN.Z:0\n;PRINT.SIZE.MAX.X:{print_bed_max[0]}\n;PRINT.SIZE.MAX.Y:{print_bed_max[1]}\n;PRINT.SIZE.MAX.Z:{max_print_height}\n;SLICE_UUID:32daaf1d-f868-4a8e-ad06-8536b153e789\n;END_OF_HEADER\nT0\nM82 ;absolute extrusion mode\n\nG21 ; metric values\nG90 ; absolute positioning\nM107 ; start with the fan off\n\nM140 S{first_layer_bed_temperature[initial_extruder]} ; start bed heating\n\nG28 ; home if supported\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\nM104 S{temperature[initial_extruder] + standby_temperature_delta} ; heat nozzle\n\nG280 S1 ; ultimaker home\n\n;To skip adaptive bed mesh probing uncomment G0 commands before ;LAYER:1\n;G0 X{print_bed_min[0]} Y{print_bed_max[1]}\n;G0 X{print_bed_min[0]} Y{print_bed_min[1]}\n;G0 X{print_bed_max[0]} Y{print_bed_min[1]}\n;G0 X{print_bed_max[0]} Y{print_bed_max[1]}\n;LAYER:1\n\n; purge retract_length_toolchange due to unknown state\n; prime extruders next to each other to verify extruder offset calibration\n\n; prime T0\nM104 S{first_layer_temperature[0]} T0 ; start heat nozzle temperature\nT0\nM109 S{first_layer_temperature[0]} T0 ; wait for nozzle temperature\nG90\nM82\nG0 X5 Y100 Z0.3 F7200\nG92 E0\nG1 X5 Y10 E1.9 F1000\nG0 X5 Y1 Z0.3 F7200\nG92 E0\nG1 X{print_bed_max[0]-30} Y1 E5.553 F1000\nG0 X{print_bed_max[0]-30} Y1.5 F7200\nG92 E0\nG1 X10 Y1.5 E5.458 F1000\nG0 X10 Y1.9 F7200\nM104 S{temperature[initial_extruder] + standby_temperature_delta} ; cool nozzle\nM104 S{first_layer_temperature[1]} T1 ; start heat next nozzle temperature\nG92 E0\nG1 X{print_bed_max[0]-28} Y1.9 E5.489 F1000\nG92 E0\nG1 E-3.5 F1200\nG0 X{print_bed_max[0]-20} Y3 F18000\nG0 X{print_bed_max[0]-15} Y10 Z3 F2400\n\nG0 X30 Y10 Z0.3 F7200\nG92 E0\nG1 E3.5 F1200\nG92 E0\nG0 Y110 E1.85 F1000\nG92 E0\nG1 E-{retract_length_toolchange[0]} F1200\nG0 Y150 F18000\nG0 Y{print_bed_max[1]} Z5 F18000\n\n; prime T1\nT1\nM109 S{first_layer_temperature[1]} T1 ; wait for nozzle temperature\nG90\nM82\nG0 X5 Y100 Z0.3 F7200\nG0 Y10 E1.9 F1000\nG0 Y2.5 F7200\nG92 E0\nG1 X{print_bed_max[0]-30} Y2.5 E5.553 F1000\nG0 X{print_bed_max[0]-30} Y2.9 F7200\nG92 E0\nG1 X10 Y2.9 E5.458 F1000\nG0 X10 Y3.3 F7200\nM104 S{temperature[1] + standby_temperature_delta} ; cool nozzle\nM104 S{first_layer_temperature[initial_extruder]} ; start heating initial nozzle\nG92 E0\nG1 X{print_bed_max[0]-28} Y3.3 E5.489 F1000\nG92 E0\nG1 E-3.5 F1200 ;retract just a little because we don't have a way to tell the slicer T1 filament position when it starts printing from E0\nG0 X{print_bed_max[0]-20} Y5 F18000\nG0 X{print_bed_max[0]-15} Y15 Z3 F2400\n\n;minus extruder1 offset X 22 which macro is not supported in start gcode\nG0 X{30+nozzle_diameter[1]-22} Y15 Z0.3 F7200\nG92 E0\nG1 E3.5 F1200\nG92 E0\nG0 Y115 E1.85 F1000\nG92 E0\nG1 E-3.5 F1200\nG0 Y150 F18000\nG0 Y{print_bed_max[1]} Z5 F18000\n\n; switch to initial nozzle\nT{initial_extruder}\nM109 S{first_layer_temperature[initial_extruder]} ; wait for nozzle temperature\nG0 X{print_bed_max[0]-30} Y5 Z10 F7200\nG0 X25 Y10 Z5\nG0 X25 Y20 Z0.3\nM82 ;absolute extrusion mode\nG92 E0\nG1 Y30 E{retract_length_toolchange[initial_extruder]} F1200 ;prime to set filament location for prusaslicer generated initial retract\nG92 E0\n\n;END Start-gcode
end_gcode = ;End-gcode\nM104 S0\nM104 S0 T0\nM104 S0 T1\nG0 X5 Y5 Z{max_print_height} F2000\nM140 S0\nM106 S0\nM84 ; disable motors\n
max_layer_height = 0.3
min_layer_height = 0.06