Profiles/repos/orcaslicer-fff/Co Print/02.03.02.60.ini

[vendor]
repo_id = orcaslicer-fff
name = Co Print
config_version = 02.03.02.60
description = CoPrint configurations
force_update = 0

[printer_model:Co Print ChromaSet]
model_id = Co_Print_ChromaSet
nozzle_diameter = 0.4
machine_tech = FFF
family = Co Print
bed_model = 
bed_texture = Co_Print_ChromaSet_buildplate_texture.png
hotend_model = 
default_materials = CoPrint Generic PLA

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 30
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = klipper
silent_mode = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 100
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 0%
retract_when_changing_layer = 0
retraction_length = 0.5
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
machine_load_filament_time = 9.75
machine_unload_filament_time = 9.75
single_extruder_multi_material = 1
wipe = 1

[printer:Co Print ChromaSet 0.4 nozzle]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Co Print ChromaSet
default_print_profile = 0.2mm Standard @Co Print ChromaSet 0.4
printer_variant = 0.4
nozzle_diameter = 0.4
nozzle_volume = 156
retract_before_wipe = 0%
printable_area = 0x0,225x0,225x225,0x225
printable_height = 250
gcode_flavor = klipper
retraction_length = 0.5
machine_max_speed_e = 100
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 5000
machine_max_acceleration_retracting = 2500
machine_max_acceleration_travel = 40000
machine_max_acceleration_x = 5000
machine_max_acceleration_y = 5000
machine_max_acceleration_z = 100
machine_max_jerk_e = 2.5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.2
z_hop = 0.2
retraction_speed = 60
deretraction_speed = 30
retraction_minimum_travel = 1
retract_length_toolchange = 2
wipe = 1
wipe_distance = 2
thumbnails = 300x300,400x300,96x96,32x32
retract_lift_below = 343
thumbnails_format = PNG
machine_start_gcode = start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
machine_end_gcode = end_print
change_filament_gcode = FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]
default_filament_profile = CoPrint Generic PLA
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
min_layer_height = 0.08
max_layer_height = 0.32
retract_restart_extra = 0
cooling_tube_retraction = 0
cooling_tube_length = 0
parking_pos_retraction = 0
retract_when_changing_layer = 0
extra_loading_move = 0
high_current_on_filament_swap = 0
enable_filament_ramming = 0
z_hop_types = Spiral Lift

[printer:Co Print ChromaSet 0.4 nozzle - Ender-3 V3]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Co Print ChromaSet
default_print_profile = 0.2mm Standard @Co Print ChromaSet 0.4
printer_variant = 0.4
nozzle_diameter = 0.4
nozzle_volume = 156
retract_before_wipe = 0%
printable_area = 0x0,180x0,180x173,0x173
printable_height = 250
gcode_flavor = klipper
retraction_length = 0.5
machine_max_speed_e = 100
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 5000
machine_max_acceleration_retracting = 2500
machine_max_acceleration_travel = 40000
machine_max_acceleration_x = 5000
machine_max_acceleration_y = 5000
machine_max_acceleration_z = 100
machine_max_jerk_e = 2.5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.2
z_hop = 0.2
retraction_speed = 60
deretraction_speed = 30
retraction_minimum_travel = 1
retract_length_toolchange = 2
wipe = 1
wipe_distance = 2
thumbnails = 300x300,400x300,96x96,32x32
retract_lift_below = 343
thumbnails_format = PNG
machine_start_gcode = start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
machine_end_gcode = end_print
change_filament_gcode = FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]
default_filament_profile = CoPrint Generic PLA
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
min_layer_height = 0.08
max_layer_height = 0.32
retract_restart_extra = 0
cooling_tube_retraction = 0
cooling_tube_length = 0
parking_pos_retraction = 0
retract_when_changing_layer = 0
extra_loading_move = 0
high_current_on_filament_swap = 0
enable_filament_ramming = 0
z_hop_types = Spiral Lift

[printer:Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Co Print ChromaSet
default_print_profile = 0.2mm Standard @Co Print ChromaSet 0.4
printer_variant = 0.4
nozzle_diameter = 0.4
nozzle_volume = 156
retract_before_wipe = 0%
printable_area = 0x0,290x0,290x283,0x283
printable_height = 330
gcode_flavor = klipper
retraction_length = 0.5
machine_max_speed_e = 100
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 5000
machine_max_acceleration_retracting = 2500
machine_max_acceleration_travel = 40000
machine_max_acceleration_x = 5000
machine_max_acceleration_y = 5000
machine_max_acceleration_z = 100
machine_max_jerk_e = 2.5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.2
z_hop = 0.2
retraction_speed = 60
deretraction_speed = 30
retraction_minimum_travel = 1
retract_length_toolchange = 2
wipe = 1
wipe_distance = 2
thumbnails = 300x300,400x300,96x96,32x32
retract_lift_below = 343
thumbnails_format = PNG
machine_start_gcode = start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
machine_end_gcode = end_print
change_filament_gcode = FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]
default_filament_profile = CoPrint Generic PLA
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
min_layer_height = 0.08
max_layer_height = 0.32
retract_restart_extra = 0
cooling_tube_retraction = 0
cooling_tube_length = 0
parking_pos_retraction = 0
retract_when_changing_layer = 0
extra_loading_move = 0
high_current_on_filament_swap = 0
enable_filament_ramming = 0
z_hop_types = Spiral Lift

[printer:Co Print ChromaSet 0.4 nozzle fast]
inherits = fdm_machine_common
from = system
setting_id = GM001
instantiation = true
printer_model = Co Print ChromaSet
default_print_profile = 0.2mm Fast @Co Print ChromaSet 0.4
printer_variant = 0.4
nozzle_diameter = 0.4
nozzle_volume = 156
retract_before_wipe = 0%
printable_area = 0x0,225x0,225x225,0x225
printable_height = 250
gcode_flavor = klipper
retraction_length = 0.5
machine_max_speed_e = 100
machine_max_speed_x = 700
machine_max_speed_y = 700
machine_max_speed_z = 20
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 20000
machine_max_acceleration_retracting = 5000
machine_max_acceleration_travel = 40000
machine_max_acceleration_x = 20000
machine_max_acceleration_y = 20000
machine_max_acceleration_z = 500
machine_max_jerk_e = 5
machine_max_jerk_x = 20
machine_max_jerk_y = 20
machine_max_jerk_z = 0.5
z_hop = 0.2
retraction_speed = 60
deretraction_speed = 30
retraction_minimum_travel = 1
retract_length_toolchange = 2
wipe = 1
wipe_distance = 2
thumbnails = 300x300,400x300,96x96,32x32
retract_lift_below = 343
thumbnails_format = PNG
machine_start_gcode = start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
machine_end_gcode = end_print
change_filament_gcode = FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]
default_filament_profile = CoPrint Generic PLA
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
min_layer_height = 0.08
max_layer_height = 0.32
retract_restart_extra = 0
cooling_tube_retraction = 0
cooling_tube_length = 0
parking_pos_retraction = 0
retract_when_changing_layer = 0
extra_loading_move = 0
high_current_on_filament_swap = 0
enable_filament_ramming = 0
z_hop_types = Spiral Lift

[printer:fdm_coprint_common]
inherits = fdm_machine_common
from = system
instantiation = false
default_print_profile = 0.20mm Standard @Co Print ChromaSet 0.4
printer_variant = 0.4
nozzle_diameter = 0.4
retract_before_wipe = 0%
printable_area = 0x0,225x0,225x225,0x225
printable_height = 250
gcode_flavor = klipper
retraction_length = 0.5
machine_max_speed_e = 100
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 5000
machine_max_acceleration_retracting = 2500
machine_max_acceleration_travel = 40000
machine_max_acceleration_x = 5000
machine_max_acceleration_y = 5000
machine_max_acceleration_z = 100
machine_max_jerk_e = 2.5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.2
z_hop = 0.2
retraction_speed = 60
deretraction_speed = 30
retraction_minimum_travel = 1
retract_length_toolchange = 2
wipe_distance = 2
thumbnails = 300x300,400x300,96x96,32x32
retract_lift_below = 343
thumbnails_format = PNG
before_layer_change_gcode = TIMELAPSE_TAKE_FRAME
G92 E0
machine_start_gcode = start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
machine_end_gcode = end_print
default_filament_profile = CoPrint Generic PLA
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 36
min_layer_height = 0.08
max_layer_height = 0.32
retract_restart_extra = 0
cooling_tube_retraction = 0
cooling_tube_length = 0
parking_pos_retraction = 10
extra_loading_move = 0

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 1
bridge_flow = 0.9031
bridge_speed = 25
internal_bridge_speed = 100
brim_width = 5
compatible_printers = 
print_sequence = by layer
default_acceleration = 5000
bridge_no_support = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.42
outer_wall_speed = 60
line_width = 0.42
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.5
layer_height = 0.2
initial_layer_print_height = 0.2
initial_layer_speed = 60
gap_infill_speed = 200
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 30%
sparse_infill_speed = 300
interface_shells = 0
detect_overhang_wall = 1
reduce_infill_retraction = 1
filename_format = {input_filename_base}{filament_type[0]}{layer_height}_{print_time}.gcode
wall_loops = 2
inner_wall_line_width = 0.45
inner_wall_speed = 100
print_settings_id = 
raft_layers = 0
seam_position = aligned
seam_gap = 5%
skirt_distance = 2
skirt_height = 1
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 200
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
support_filament = 0
support_line_width = 0.42
support_interface_filament = 0
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0.5
support_interface_speed = 200
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 200
extra_perimeters_on_overhangs = 0
initial_layer_infill_speed = 60
support_threshold_angle = 35
support_object_xy_distance = 0.35
detect_thin_wall = 1
top_surface_line_width = 0.4
top_surface_speed = 80
travel_speed = 350
enable_prime_tower = 1
prime_tower_width = 150
xy_hole_compensation = 0
xy_contour_compensation = 0
resolution = 0.012
wall_generator = arachne
wall_sequence = inner wall/outer wall
print_flow_ratio = 1
top_shell_layers = 4
internal_bridge_flow = 0.9031
slow_down_layers = 3
gap_fill_target = nowhere
skirt_loops = 3
skirt_speed = 50
draft_shield = disabled
brim_type = no_brim
exclude_object = 1
inner_wall_acceleration = 3000
top_solid_infill_flow_ratio = 1
bottom_solid_infill_flow_ratio = 1
outer_wall_acceleration = 1500
bridge_acceleration = 800%
sparse_infill_acceleration = 80%
internal_solid_infill_acceleration = 80%
infill_layer_acceleration = 1500
top_surface_acceleration = 1000
travel_acceleration = 5000
accel_to_decel_enable = 1
top_shell_thickness = 1
infill_anchor = 400%
infill_anchor_max = 20
accel_to_decel = 50%
overhang_1_4_speed = 80
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
initial_layer_acceleration = 1500

[print:fdm_process_coprint_common]
inherits = fdm_process_common
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 1
bridge_flow = 0.9031
bridge_speed = 25
default_jerk = 0
infill_jerk = 12
inner_wall_jerk = 7
outer_wall_jerk = 7
wipe_speed = 60%
tree_support_wall_count = 2
role_based_wipe_speed = 0
staggered_inner_seams = 1
internal_bridge_speed = 100
brim_width = 5
layer_height = 0.2
print_sequence = by layer
default_acceleration = 5000
bridge_no_support = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.42
outer_wall_speed = 60
line_width = 0.42
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.5
initial_layer_print_height = 0.2
initial_layer_speed = 60
gap_infill_speed = 200
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 30%
sparse_infill_speed = 300
interface_shells = 0
detect_overhang_wall = 1
reduce_infill_retraction = 1
filename_format = {input_filename_base}{filament_type[0]}{layer_height}_{print_time}.gcode
wall_loops = 2
inner_wall_line_width = 0.45
inner_wall_speed = 100
print_settings_id = 
raft_layers = 0
seam_position = aligned
seam_gap = 5%
skirt_distance = 2
skirt_height = 1
support_type = tree(auto)
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 200
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
support_filament = 0
support_line_width = 0.42
support_interface_filament = 0
initial_layer_infill_speed = 60
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_bottom_layers = -1
support_interface_spacing = 0.5
support_interface_speed = 200
support_base_pattern = rectilinear
support_base_pattern_spacing = 2.5
support_speed = 200
support_threshold_angle = 35
support_object_xy_distance = 0.35
detect_thin_wall = 1
top_surface_line_width = 0.4
top_surface_speed = 80
travel_speed = 350
enable_prime_tower = 1
prime_tower_width = 150
xy_hole_compensation = 0
xy_contour_compensation = 0
resolution = 0.012
wall_generator = arachne
wall_sequence = inner wall/outer wall
wipe_tower_max_purge_speed = 150
print_flow_ratio = 1
internal_bridge_flow = 0.9031
gap_fill_target = nowhere
slow_down_layers = 3
top_shell_layers = 4
skirt_loops = 3
skirt_speed = 50
extra_perimeters_on_overhangs = 0
bottom_solid_infill_flow_ratio = 1
top_solid_infill_flow_ratio = 1
draft_shield = disabled
brim_type = no_brim
exclude_object = 1
inner_wall_acceleration = 3000
outer_wall_acceleration = 1500
bridge_acceleration = 80%
sparse_infill_acceleration = 80%
internal_solid_infill_acceleration = 80%
infill_layer_acceleration = 1500
top_surface_acceleration = 1000
travel_acceleration = 5000
accel_to_decel_enable = 1
accel_to_decel = 50%
infill_anchor = 400%
infill_anchor_max = 20
top_shell_thickness = 1
initial_layer_acceleration = 1500

[print:0.2mm Fast @Co Print ChromaSet 0.4]
inherits = fdm_process_coprint_common
from = system
setting_id = GP004
instantiation = true
elefant_foot_compensation = 0.1
initial_layer_speed = 60
initial_layer_infill_speed = 100
inner_wall_speed = 200
small_perimeter_speed = 50%
internal_solid_infill_speed = 300
travel_speed = 500
gap_infill_speed = 300
outer_wall_speed = 120
top_surface_speed = 150
default_acceleration = 10000
outer_wall_acceleration = 3000
inner_wall_acceleration = 8000
bridge_acceleration = 80%
sparse_infill_acceleration = 80%
initial_layer_acceleration = 1500
internal_solid_infill_acceleration = 80%
top_surface_acceleration = 2000
travel_acceleration = 10000
default_jerk = 0
wipe_tower_max_purge_speed = 200
compatible_printers = Co Print ChromaSet 0.4 nozzle fast,Co Print ChromaSet 0.4 nozzle - Ender-3 V3,Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus

[print:0.2mm Standard @Co Print ChromaSet 0.4]
inherits = fdm_process_coprint_common
from = system
setting_id = GP004
instantiation = true
default_acceleration = 5000
compatible_printers = Co Print ChromaSet 0.4 nozzle,Co Print ChromaSet 0.4 nozzle - Ender-3 V3,Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus

[filament:fdm_filament_common]
from = system
instantiation = false
cool_plate_temp = 60
eng_plate_temp = 60
hot_plate_temp = 60
textured_plate_temp = 60
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 60
hot_plate_temp_initial_layer = 60
textured_plate_temp_initial_layer = 60
overhang_fan_threshold = 95%
overhang_fan_speed = 100
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
filament_flow_ratio = 0.95
reduce_fan_stop_start_freq = 0
fan_cooling_layer_time = 60
filament_cost = 0
filament_density = 0
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_max_volumetric_speed = 14
filament_minimal_purge_on_wipe_tower = 15
filament_retraction_minimum_travel = nil
filament_retract_before_wipe = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_z_hop = nil
filament_retract_restart_extra = nil
filament_retraction_speed = nil
filament_settings_id = 
filament_soluble = 0
filament_type = PLA
filament_vendor = Co Print
filament_wipe = nil
filament_wipe_distance = nil
bed_type = Cool Plate
nozzle_temperature_initial_layer = 200
full_fan_speed_layer = 0
fan_max_speed = 100
fan_min_speed = 100
slow_down_min_speed = 10
slow_down_layer_time = 8
nozzle_temperature = 200
temperature_vitrification = 100

[filament:fdm_filament_pla]
inherits = fdm_filament_common
from = system
instantiation = false
activate_air_filtration = 0
additional_cooling_fan_speed = 70
chamber_temperatures = 0
close_fan_the_first_x_layers = 1
complete_print_exhaust_fan_speed = 100
cool_plate_temp = 35
cool_plate_temp_initial_layer = 35
during_print_exhaust_fan_speed = 100
eng_plate_temp = 0
eng_plate_temp_initial_layer = 0
fan_cooling_layer_time = 50
fan_max_speed = 100
fan_min_speed = 100
filament_cost = 20
filament_density = 1.24
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_flow_ratio = 0.95
filament_is_support = 0
filament_max_volumetric_speed = 14
filament_minimal_purge_on_wipe_tower = 15
filament_retract_before_wipe = nil
filament_retract_restart_extra = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_retraction_minimum_travel = nil
filament_retraction_speed = nil
filament_settings_id = 
filament_soluble = 0
filament_type = PLA
filament_vendor = Co Print
filament_wipe = nil
filament_wipe_distance = nil
filament_z_hop = nil
full_fan_speed_layer = 3
hot_plate_temp = 60
hot_plate_temp_initial_layer = 60
nozzle_temperature = 210
nozzle_temperature_initial_layer = 210
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 250
overhang_fan_speed = 100
overhang_fan_threshold = 50%
reduce_fan_stop_start_freq = 1
required_nozzle_HRC = 3
slow_down_for_layer_cooling = 1
slow_down_layer_time = 5
slow_down_min_speed = 10
temperature_vitrification = 45
textured_plate_temp = 55
textured_plate_temp_initial_layer = 55
compatible_printers = 
filament_shrink = 100
filament_loading_speed_start = 3
filament_loading_speed = 28
filament_unloading_speed_start = 100
filament_unloading_speed = 90
filament_load_time = 9.75
filament_unload_time = 9.75
filament_toolchange_delay = 0
filament_cooling_moves = 0
filament_cooling_initial_speed = 2.2
filament_cooling_final_speed = 3.4
enable_pressure_advance = 1
pressure_advance = 0.05

[filament:CoPrint Generic PLA]
inherits = fdm_filament_pla
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
filament_load_time = 9.75
filament_unload_time = 9.75
compatible_printers = Co Print ChromaSet 0.4 nozzle,Co Print ChromaSet 0.4 nozzle - Ender-3 V3,Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus,Co Print ChromaSet 0.4 nozzle fast

[filament:CoPrint Generic ABS]
inherits = CoPrint Generic PLA
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 30
fan_max_speed = 60
fan_min_speed = 10
filament_density = 1.04
filament_flow_ratio = 0.94
filament_max_volumetric_speed = 16
filament_type = ABS
full_fan_speed_layer = 5
hot_plate_temp = 100
hot_plate_temp_initial_layer = 100
nozzle_temperature = 280
nozzle_temperature_initial_layer = 260
nozzle_temperature_range_high = 280
nozzle_temperature_range_low = 240
overhang_fan_threshold = 25%
pressure_advance = 0.02
slow_down_layer_time = 12
slow_down_min_speed = 20
temperature_vitrification = 100
compatible_printers = Co Print ChromaSet 0.4 nozzle,Co Print ChromaSet 0.4 nozzle - Ender-3 V3,Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus,Co Print ChromaSet 0.4 nozzle fast

[filament:CoPrint Generic PETG]
inherits = CoPrint Generic PLA
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
fan_max_speed = 90
fan_min_speed = 60
filament_deretraction_speed = 50
filament_retraction_length = 1.2
filament_retraction_speed = 50
filament_type = PETG
hot_plate_temp = 70
hot_plate_temp_initial_layer = 70
nozzle_temperature = 240
nozzle_temperature_initial_layer = 240
compatible_printers = Co Print ChromaSet 0.4 nozzle,Co Print ChromaSet 0.4 nozzle - Ender-3 V3,Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus,Co Print ChromaSet 0.4 nozzle fast

[filament:CoPrint Generic TPU]
inherits = CoPrint Generic PLA
from = system
setting_id = GFSA04
filament_id = GFL99
instantiation = true
fan_max_speed = 80
fan_min_speed = 80
filament_deretraction_speed = 20
filament_flow_ratio = 0.97
filament_retract_when_changing_layer = 0
filament_retraction_length = 1.8
filament_retraction_speed = 20
filament_type = TPU
hot_plate_temp = 50
hot_plate_temp_initial_layer = 50
nozzle_temperature = 230
nozzle_temperature_initial_layer = 230
compatible_printers = Co Print ChromaSet 0.4 nozzle,Co Print ChromaSet 0.4 nozzle - Ender-3 V3,Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus,Co Print ChromaSet 0.4 nozzle fast