Profiles/repos/orcaslicer-fff/RH3D/02.03.02.60.ini

[vendor]
repo_id = orcaslicer-fff
name = RH3D
config_version = 02.03.02.60
description = RH3D - printer profiles
force_update = 0

[printer_model:E3NG v1.2S]
nozzle_diameter = 0.2;0.3;0.4;0.5;0.6
bed_model = E3NG-bed.stl
bed_texture = E3NG-bed-texture.svg
model_id = E3NGV12S
family = RH3D
hotend_model = 
machine_tech = FFF
default_materials = Generic ABS @E3NG v1.2S;Generic ASA @E3NG v1.2S;Generic PCCF @E3NG v1.2S;Generic PETG @E3NG v1.2S;Generic PLA @E3NG v1.2S;Generic TPU @E3NG v1.2S

[printer:fdm_machine_common]
from = system
instantiation = false
printer_structure = corexy
gcode_flavor = klipper
machine_start_gcode = M104 S0 ; Stops OrcaSlicer from sending temp waits separately
M140 S0
PRINT_START EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]
; Start of actual GCode for the print
machine_end_gcode = PRINT_END
extruder_colour = #02aba2
extruder_offset = 0x0
emit_machine_limits_to_gcode = 0
default_filament_profile = Generic PLA @E3NG v1.2S
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.30
min_layer_height = 0.10
nozzle_diameter = 0.4
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 1
retract_when_changing_layer = 1
retraction_length = 0.6
retract_length_toolchange = 2
z_hop = 0.0
z_hop_types = Slope Lift
use_firmware_retraction = 1
use_relative_e_distances = 1
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 40
deretraction_speed = 60
single_extruder_multi_material = 0
thumbnails = 16x16/QOI,313x173/QOI,440x240/QOI,480x240/QOI,32x32/PNG,320x240/PNG,640x480/PNG
change_filament_gcode = PAUSE
G1 E1.0 F300 ; prime after color change
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
G92 E0
layer_change_gcode = ;AFTER_LAYER_CHANGE
machine_pause_gcode = PAUSE

wipe = 1

[printer:fdm_common_E3NG v1.2S]
inherits = fdm_machine_common
from = system
instantiation = false
extruder_clearance_height_to_lid = 140
extruder_clearance_height_to_rod = 36
extruder_clearance_radius = 65
machine_max_acceleration_e = 7500,7500
machine_max_acceleration_extruding = 20000,20000
machine_max_acceleration_retracting = 20000,20000
machine_max_acceleration_travel = 10000,10000
machine_max_acceleration_x = 20000,20000
machine_max_acceleration_y = 20000,20000
machine_max_acceleration_z = 500,500
machine_max_speed_e = 25,25
machine_max_speed_x = 400,400
machine_max_speed_y = 400,400
machine_max_speed_z = 12,12
printable_area = 0x0,232x0,232x232,0x232
printable_height = 245
printer_model = E3NG v1.2S
printer_notes = Design by RH3D
retract_before_wipe = 80%
retract_length_toolchange = 0
retract_lift_below = 240
retraction_minimum_travel = 1.5
travel_slope = 1

[printer:E3NG v1.2S - 0.2 nozzle]
printer_model = E3NG v1.2S
inherits = fdm_common_E3NG v1.2S
from = system
instantiation = true
default_print_profile = 0.10mm Standard @E3NG v1.2S
nozzle_diameter = 0.2
printer_variant = 0.2

[printer:E3NG v1.2S - 0.3 nozzle]
printer_model = E3NG v1.2S
inherits = fdm_common_E3NG v1.2S
from = system
instantiation = true
default_print_profile = 0.15mm Standard @E3NG v1.2S
nozzle_diameter = 0.3
printer_variant = 0.3

[printer:E3NG v1.2S - 0.4 nozzle]
printer_model = E3NG v1.2S
inherits = fdm_common_E3NG v1.2S
from = system
instantiation = true
default_print_profile = 0.20mm Standard @E3NG v1.2S
nozzle_diameter = 0.4
printer_variant = 0.4

[printer:E3NG v1.2S - 0.5 nozzle]
printer_model = E3NG v1.2S
inherits = fdm_common_E3NG v1.2S
from = system
instantiation = true
default_print_profile = 0.20mm Standard @E3NG v1.2S
nozzle_diameter = 0.5
printer_variant = 0.5

[printer:E3NG v1.2S - 0.6 nozzle]
printer_model = E3NG v1.2S
inherits = fdm_common_E3NG v1.2S
from = system
instantiation = true
default_print_profile = 0.25mm Standard @E3NG v1.2S
nozzle_diameter = 0.6
printer_variant = 0.6

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 1
max_travel_detour_distance = 0
bottom_surface_pattern = monotonicline
bottom_shell_thickness = 0
bridge_speed = 50
brim_width = 0
brim_object_gap = 0.1
compatible_printers = 
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 5000
initial_layer_acceleration = 5000
top_surface_acceleration = 5000
travel_acceleration = 5000
inner_wall_acceleration = 5000
outer_wall_acceleration = 5000
bridge_acceleration = 2500
sparse_infill_acceleration = 8000
internal_solid_infill_acceleration = 5000
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0.1
enable_arc_fitting = 0
wall_infill_order = inner wall/outer wall/infill
infill_direction = 45
sparse_infill_density = 20%
sparse_infill_pattern = cubic
initial_layer_print_height = 0.2
infill_combination = 0
infill_wall_overlap = 25%
interface_shells = 0
ironing_flow = 10%
ironing_spacing = 0.25
ironing_speed = 100
ironing_type = no ironing
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[0]}_{print_time}_{printer_model}.gcode
detect_overhang_wall = 1
slowdown_for_curled_perimeters = 1
overhang_1_4_speed = 70
overhang_2_4_speed = 40
overhang_3_4_speed = 25
overhang_4_4_speed = 10
line_width = 110%
inner_wall_line_width = 110%
outer_wall_line_width = 100%
top_surface_line_width = 85%
sparse_infill_line_width = 115%
initial_layer_line_width = 110%
internal_solid_infill_line_width = 110%
support_line_width = 100%
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 2
skirt_height = 1
min_skirt_length = 30
skirt_loops = 5
minimum_sparse_infill_area = 15
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
support_filament = 0
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 3
support_interface_bottom_layers = 0
support_interface_spacing = 0.2
support_interface_speed = 80
support_base_pattern = default
support_base_pattern_spacing = 2.0
support_speed = 180
support_threshold_angle = 40
support_object_xy_distance = 0.4
tree_support_branch_angle = 30
tree_support_wall_count = 0
tree_support_with_infill = 0
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_shell_thickness = 0.8
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
wipe_before_external_loop = 1
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
layer_height = 0.2
bottom_shell_layers = 4
top_shell_layers = 4
bridge_flow = 1
initial_layer_speed = 80
initial_layer_infill_speed = 100
outer_wall_speed = 220
inner_wall_speed = 220
small_perimeter_speed = 220
sparse_infill_speed = 300
internal_solid_infill_speed = 220
top_surface_speed = 180
gap_infill_speed = 220
travel_speed = 400
exclude_object = 1
internal_solid_infill_pattern = monotonicline
only_one_wall_top = 1
only_one_wall_first_layer = 1

[print:process_common_E3NG v1.2S]
inherits = fdm_process_common
from = system
instantiation = false

[print:0.10mm Standard @E3NG v1.2S]
inherits = process_common_E3NG v1.2S
from = system
setting_id = NG2010
instantiation = true
layer_height = 0.1
initial_layer_print_height = 0.15
compatible_printers = E3NG v1.2S - 0.2 nozzle,E3NG v1.2S - 0.3 nozzle,E3NG v1.2S - 0.4 nozzle

[print:0.15mm Standard @E3NG v1.2S]
inherits = process_common_E3NG v1.2S
from = system
setting_id = NG2015
instantiation = true
layer_height = 0.15
initial_layer_print_height = 0.2
compatible_printers = E3NG v1.2S - 0.2 nozzle,E3NG v1.2S - 0.3 nozzle,E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle

[print:0.20mm Fast @E3NG v1.2S]
inherits = process_common_E3NG v1.2S
from = system
setting_id = NG3020
instantiation = true
layer_height = 0.2
initial_layer_print_height = 0.2
compatible_printers = E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle
reduce_crossing_wall = 0
bridge_speed = 75
default_acceleration = 10000
initial_layer_acceleration = 7500
top_surface_acceleration = 7500
travel_acceleration = 10000
inner_wall_acceleration = 10000
outer_wall_acceleration = 7500
bridge_acceleration = 5000
sparse_infill_acceleration = 12500
internal_solid_infill_acceleration = 10000
infill_combination = 1
ironing_speed = 150
overhang_1_4_speed = 100
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 15
support_interface_speed = 120
top_surface_line_width = 100%
sparse_infill_line_width = 125%
internal_solid_infill_line_width = 125%
seam_position = nearest
initial_layer_speed = 100
initial_layer_infill_speed = 150
outer_wall_speed = 300
inner_wall_speed = 340
small_perimeter_speed = 300
sparse_infill_speed = 400
internal_solid_infill_speed = 340
top_surface_speed = 300
gap_infill_speed = 300
travel_speed = 400
only_one_wall_top = 0
only_one_wall_first_layer = 0

[print:0.20mm Slow @E3NG v1.2S]
inherits = process_common_E3NG v1.2S
from = system
setting_id = NG1020
instantiation = true
layer_height = 0.2
initial_layer_print_height = 0.2
compatible_printers = E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle
reduce_crossing_wall = 1
bridge_speed = 40
default_acceleration = 3000
initial_layer_acceleration = 3000
top_surface_acceleration = 2000
travel_acceleration = 3000
inner_wall_acceleration = 3000
outer_wall_acceleration = 3000
bridge_acceleration = 2000
sparse_infill_acceleration = 4000
internal_solid_infill_acceleration = 3000
infill_combination = 0
ironing_speed = 80
overhang_1_4_speed = 60
overhang_2_4_speed = 35
overhang_3_4_speed = 20
overhang_4_4_speed = 8
support_interface_speed = 60
top_surface_line_width = 100%
sparse_infill_line_width = 125%
internal_solid_infill_line_width = 125%
seam_position = aligned
initial_layer_speed = 60
initial_layer_infill_speed = 75
outer_wall_speed = 140
inner_wall_speed = 140
small_perimeter_speed = 140
sparse_infill_speed = 140
internal_solid_infill_speed = 140
top_surface_speed = 140
gap_infill_speed = 140
travel_speed = 400
only_one_wall_top = 1
only_one_wall_first_layer = 1

[print:0.20mm Standard @E3NG v1.2S]
inherits = process_common_E3NG v1.2S
from = system
setting_id = NG2020
instantiation = true
compatible_printers = E3NG v1.2S - 0.3 nozzle,E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle

[print:0.25mm Fast @E3NG v1.2S]
inherits = process_common_E3NG v1.2S
from = system
setting_id = NG3025
instantiation = true
layer_height = 0.25
initial_layer_print_height = 0.25
compatible_printers = E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle
reduce_crossing_wall = 0
bridge_speed = 75
default_acceleration = 10000
initial_layer_acceleration = 7500
top_surface_acceleration = 7500
travel_acceleration = 10000
inner_wall_acceleration = 10000
outer_wall_acceleration = 7500
bridge_acceleration = 5000
sparse_infill_acceleration = 12500
internal_solid_infill_acceleration = 10000
infill_combination = 1
ironing_speed = 150
overhang_1_4_speed = 100
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 15
support_interface_speed = 120
top_surface_line_width = 100%
sparse_infill_line_width = 125%
internal_solid_infill_line_width = 125%
seam_position = nearest
initial_layer_speed = 100
initial_layer_infill_speed = 150
outer_wall_speed = 300
inner_wall_speed = 340
small_perimeter_speed = 300
sparse_infill_speed = 400
internal_solid_infill_speed = 340
top_surface_speed = 300
gap_infill_speed = 300
travel_speed = 400
only_one_wall_top = 0
only_one_wall_first_layer = 0

[print:0.25mm Standard @E3NG v1.2S]
inherits = process_common_E3NG v1.2S
from = system
setting_id = NG2025
instantiation = true
layer_height = 0.25
initial_layer_print_height = 0.25
compatible_printers = E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle

[filament:fdm_filament_common]
from = system
instantiation = false
cool_plate_temp = 60
eng_plate_temp = 60
hot_plate_temp = 60
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 60
hot_plate_temp_initial_layer = 60
overhang_fan_threshold = 95%
overhang_fan_speed = 100
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 1
filament_end_gcode = ; filament end gcode 

filament_flow_ratio = 1
reduce_fan_stop_start_freq = 0
fan_cooling_layer_time = 15
filament_cost = 0
filament_density = 0
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_max_volumetric_speed = 10
filament_minimal_purge_on_wipe_tower = 40
filament_retraction_minimum_travel = nil
filament_retract_before_wipe = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_z_hop = nil
filament_retract_restart_extra = nil
filament_retraction_speed = nil
filament_settings_id = 
filament_soluble = 0
filament_type = PLA
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
bed_type = Cool Plate
nozzle_temperature_initial_layer = 200
full_fan_speed_layer = 3
fan_max_speed = 100
fan_min_speed = 10
slow_down_min_speed = 10
slow_down_layer_time = 3
filament_start_gcode = ; Filament gcode

nozzle_temperature = 200
temperature_vitrification = 100

[filament:fdm_filament_abs]
inherits = fdm_filament_common
from = system
filament_id = GFRH01
instantiation = false
cool_plate_temp = 100
eng_plate_temp = 115
hot_plate_temp = 115
cool_plate_temp_initial_layer = 100
eng_plate_temp_initial_layer = 115
hot_plate_temp_initial_layer = 115
chamber_temperature = 55
fan_cooling_layer_time = 10
filament_max_volumetric_speed = 32
filament_type = ABS
filament_density = 1.04
filament_shrink = 99.487
filament_flow_ratio = 0.94
filament_cost = 20
idle_temperature = 200
nozzle_temperature_initial_layer = 265
fan_max_speed = 60
fan_min_speed = 20
overhang_fan_threshold = 25%
overhang_fan_speed = 80
nozzle_temperature = 265
temperature_vitrification = 110
nozzle_temperature_range_low = 250
nozzle_temperature_range_high = 275
slow_down_min_speed = 10
slow_down_layer_time = 2

[filament:fdm_filament_asa]
inherits = fdm_filament_common
from = system
filament_id = GFRH02
instantiation = false
cool_plate_temp = 100
eng_plate_temp = 115
hot_plate_temp = 115
cool_plate_temp_initial_layer = 100
eng_plate_temp_initial_layer = 115
hot_plate_temp_initial_layer = 115
chamber_temperature = 55
fan_cooling_layer_time = 10
filament_max_volumetric_speed = 32
filament_type = ASA
filament_density = 1.04
filament_shrink = 99.487
filament_flow_ratio = 0.94
filament_cost = 20
idle_temperature = 200
nozzle_temperature_initial_layer = 265
fan_max_speed = 50
fan_min_speed = 10
overhang_fan_threshold = 25%
overhang_fan_speed = 80
nozzle_temperature = 265
temperature_vitrification = 110
nozzle_temperature_range_low = 250
nozzle_temperature_range_high = 275
slow_down_min_speed = 10
slow_down_layer_time = 2

[filament:fdm_filament_pccf]
inherits = fdm_filament_common
from = system
filament_id = GFRH06
instantiation = false
cool_plate_temp = 0
eng_plate_temp = 90
hot_plate_temp = 90
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 90
hot_plate_temp_initial_layer = 90
chamber_temperature = 55
fan_cooling_layer_time = 10
filament_max_volumetric_speed = 8
filament_type = PC-CF
filament_density = 1.04
filament_shrink = 99.85
filament_flow_ratio = 0.9
filament_cost = 40
idle_temperature = 240
nozzle_temperature_initial_layer = 300
fan_max_speed = 40
fan_min_speed = 25
overhang_fan_threshold = 25%
overhang_fan_speed = 60
nozzle_temperature = 320
temperature_vitrification = 140
nozzle_temperature_range_low = 290
nozzle_temperature_range_high = 330
slow_down_min_speed = 10
slow_down_layer_time = 2

[filament:fdm_filament_petg]
inherits = fdm_filament_common
from = system
filament_id = GFRH03
instantiation = false
cool_plate_temp = 70
eng_plate_temp = 0
hot_plate_temp = 90
cool_plate_temp_initial_layer = 70
eng_plate_temp_initial_layer = 0
hot_plate_temp_initial_layer = 90
fan_cooling_layer_time = 10
filament_max_volumetric_speed = 26
filament_type = PETG
filament_density = 1.27
filament_shrink = 99.85
filament_flow_ratio = 0.96
filament_cost = 30
idle_temperature = 190
nozzle_temperature_initial_layer = 250
fan_max_speed = 60
fan_min_speed = 20
overhang_fan_threshold = 25%
overhang_fan_speed = 100
nozzle_temperature = 250
temperature_vitrification = 80
nozzle_temperature_range_low = 230
nozzle_temperature_range_high = 260
slow_down_min_speed = 12
slow_down_layer_time = 3

[filament:fdm_filament_pla]
inherits = fdm_filament_common
from = system
filament_id = GFRH04
instantiation = false
cool_plate_temp = 40
eng_plate_temp = 67
hot_plate_temp = 67
cool_plate_temp_initial_layer = 45
eng_plate_temp_initial_layer = 70
hot_plate_temp_initial_layer = 70
fan_cooling_layer_time = 15
filament_max_volumetric_speed = 24
filament_type = PLA
filament_density = 1.24
filament_shrink = 99.95
filament_flow_ratio = 0.92
filament_cost = 20
idle_temperature = 180
nozzle_temperature_initial_layer = 230
fan_max_speed = 100
fan_min_speed = 80
overhang_fan_threshold = 25%
overhang_fan_speed = 100
nozzle_temperature = 230
temperature_vitrification = 60
nozzle_temperature_range_low = 210
nozzle_temperature_range_high = 250
slow_down_min_speed = 10
slow_down_layer_time = 6

[filament:fdm_filament_tpu]
inherits = fdm_filament_common
from = system
filament_id = GFRH05
instantiation = false
cool_plate_temp = 30
eng_plate_temp = 50
hot_plate_temp = 50
cool_plate_temp_initial_layer = 30
eng_plate_temp_initial_layer = 50
hot_plate_temp_initial_layer = 50
fan_cooling_layer_time = 50
filament_max_volumetric_speed = 10
filament_type = TPU
filament_density = 1.24
filament_shrink = 99.95
filament_flow_ratio = 0.96
filament_cost = 20
idle_temperature = 170
nozzle_temperature_initial_layer = 240
fan_max_speed = 1000
fan_min_speed = 80
overhang_fan_threshold = 25%
overhang_fan_speed = 100
nozzle_temperature = 240
temperature_vitrification = 60
nozzle_temperature_range_low = 230
nozzle_temperature_range_high = 250
slow_down_min_speed = 15
slow_down_layer_time = 5

[filament:Generic ABS @E3NG v1.2S]
inherits = fdm_filament_abs
from = system
setting_id = 
filament_id = Generic ABS @E3NG v1.2S
instantiation = true
compatible_printers = E3NG v1.2S - 0.2 nozzle,E3NG v1.2S - 0.3 nozzle,E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle

[filament:Generic ASA @E3NG v1.2S]
inherits = fdm_filament_asa
from = system
setting_id = 
filament_id = Generic ASA @E3NG v1.2S
instantiation = true
compatible_printers = E3NG v1.2S - 0.2 nozzle,E3NG v1.2S - 0.3 nozzle,E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle

[filament:Generic PCCF @E3NG v1.2S]
inherits = fdm_filament_pccf
from = system
setting_id = 
filament_id = Generic PCCF @E3NG v1.2S
instantiation = true
compatible_printers = E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle

[filament:Generic PETG @E3NG v1.2S]
inherits = fdm_filament_petg
from = system
setting_id = 
filament_id = Generic PETG @E3NG v1.2S
instantiation = true
compatible_printers = E3NG v1.2S - 0.2 nozzle,E3NG v1.2S - 0.3 nozzle,E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle

[filament:Generic PLA @E3NG v1.2S]
inherits = fdm_filament_pla
from = system
setting_id = 
filament_id = Generic PLA @E3NG v1.2S
instantiation = true
compatible_printers = E3NG v1.2S - 0.2 nozzle,E3NG v1.2S - 0.3 nozzle,E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle

[filament:Generic TPU @E3NG v1.2S]
inherits = fdm_filament_tpu
from = system
setting_id = 
filament_id = Generic TPU @E3NG v1.2S
instantiation = true
compatible_printers = E3NG v1.2S - 0.4 nozzle,E3NG v1.2S - 0.5 nozzle,E3NG v1.2S - 0.6 nozzle