mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 16:59:21 +00:00
Dark98
44 lines
2.1 KiB
INI
44 lines
2.1 KiB
INI
[printer:*common_mega*]
|
|
printer_technology = FFF
|
|
bed_shape = 0x0,210x0,210x210,0x210
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
|
|
default_filament_profile = Generic PLA @MEGA
|
|
default_print_profile = 0.15mm QUALITY @MEGA
|
|
deretract_speed = 50
|
|
end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors
|
|
extruder_colour = #808080
|
|
gcode_flavor = marlin
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
max_layer_height = 0.36
|
|
max_print_height = 205
|
|
remaining_times = 1
|
|
retract_before_travel = 1.5
|
|
retract_before_wipe = 60%
|
|
retract_layer_change = 1
|
|
retract_length = 6
|
|
retract_lift = 0.075
|
|
retract_lift_below = 204
|
|
retract_speed = 40
|
|
silent_mode = 0
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0
|
|
thumbnails = 16x16,220x124
|
|
use_relative_e_distances = 1
|
|
wipe = 1
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 1250
|
|
machine_max_acceleration_retracting = 1250
|
|
machine_max_acceleration_x = 3000
|
|
machine_max_acceleration_y = 2000
|
|
machine_max_acceleration_z = 60
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 6
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.4
|
|
extruder_clearance_height = 35
|
|
extruder_clearance_radius = 60
|
|
|