mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 16:59:47 +00:00
Dark98
32 lines
1.2 KiB
INI
32 lines
1.2 KiB
INI
[filament:mycusini 3D Choco @MC2.0]
|
|
filament_vendor = Print4Taste
|
|
bed_temperature = 0
|
|
bridge_fan_speed = 0
|
|
compatible_printers_condition = printer_notes=~/.*PRINT4TASTE.*/ and printer_notes=~/.*MYCUSINI2.0.*/
|
|
cooling = 1
|
|
disable_fan_first_layers = 0
|
|
end_filament_gcode = ""
|
|
extrusion_multiplier = 0.95
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 60
|
|
filament_colour = #F4A6FF
|
|
filament_density = 1.26
|
|
filament_diameter = 18
|
|
filament_max_volumetric_speed = 8
|
|
filament_notes = "Full cartridge: 18 x 100 mm, 32g\nDensity: 1.26 g/cm3\nCut cartrige size: 18 x ~50 mm, 16g\nMycusini 2.0 does not require temperature control in gcode\n\n\nDon't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRINT4TASTE\nPRINTER_MODEL_MYCUSINI2.0"
|
|
ilament_retract_before_wipe = 30%
|
|
filament_retract_layer_change = 1
|
|
filament_retract_length = 0.3
|
|
filament_retract_lift = 1
|
|
filament_type = GLAZE
|
|
filament_wipe = 1
|
|
first_layer_bed_temperature = 0
|
|
first_layer_temperature = 0
|
|
max_fan_speed = 0
|
|
min_fan_speed = 0
|
|
min_print_speed = 9
|
|
slowdown_below_layer_time = 15
|
|
start_filament_gcode = ""
|
|
temperature = 0
|
|
|