mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-06 08:49:09 +00:00
Dark98
87 lines
2.6 KiB
INI
87 lines
2.6 KiB
INI
[printer:*common*]
|
|
printer_vendor = AnkerMake
|
|
# General
|
|
## Size and coordinates
|
|
max_print_height = 250
|
|
z_offset = 0
|
|
## Capabilities
|
|
#extruders_count = 1
|
|
single_extruder_multi_material = 0
|
|
## Firmware
|
|
gcode_flavor = marlin2
|
|
thumbnails = 256x256
|
|
thumbnails_format = PNG
|
|
silent_mode = 0
|
|
remaining_times = 1
|
|
## Advanced
|
|
use_relative_e_distances = 1
|
|
use_firmware_retraction = 0
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
# Custom G-code
|
|
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}\n
|
|
autoemit_temperature_commands = 1
|
|
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n;LAYER:{layer_num+1}
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0
|
|
toolchange_gcode =
|
|
between_objects_gcode =
|
|
color_change_gcode = M600
|
|
pause_print_gcode = M601
|
|
template_custom_gcode =
|
|
# Machine limits
|
|
## General
|
|
### machine_limits_usage = emit_to_gcode time_estimate_only ignore
|
|
machine_limits_usage = time_estimate_only
|
|
## Maximum feedrates
|
|
machine_max_feedrate_e = 100
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 50
|
|
## Maximum accelerations
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 10000
|
|
machine_max_acceleration_retracting = 10000
|
|
machine_max_acceleration_travel = 10000
|
|
machine_max_acceleration_x = 10000
|
|
machine_max_acceleration_y = 10000
|
|
machine_max_acceleration_z = 10000
|
|
## Jerk limits
|
|
machine_max_jerk_x = 15, 15
|
|
machine_max_jerk_y = 15, 15
|
|
machine_max_jerk_z = 0.3, 0.3
|
|
machine_max_jerk_e = 3, 3
|
|
machine_min_extruding_rate = 0, 0
|
|
machine_min_travel_rate = 0, 0
|
|
# Extruder 1 2 3 4 5 6
|
|
## Size
|
|
nozzle_diameter = 0.4
|
|
## Preview
|
|
extruder_colour = #9BE198
|
|
## Layer height limits
|
|
min_layer_height = 0.08
|
|
max_layer_height = 0.32
|
|
## Position (for multi-extruder printers)
|
|
extruder_offset = 0x0
|
|
## Retraction
|
|
retract_length = 3
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 0
|
|
retract_speed = 60
|
|
deretract_speed = 0
|
|
retract_restart_extra = 0
|
|
retract_before_travel = 0.8
|
|
retract_layer_change = 1
|
|
wipe = 0
|
|
retract_before_wipe = 0%
|
|
## Retraction when tool is disabled (advanced settings for multi-extruder setups)
|
|
retract_length_toolchange = 4
|
|
retract_restart_extra_toolchange = 0
|
|
# Notes
|
|
printer_notes = Base printer notes is EMPTY!
|
|
default_print_profile =
|
|
default_filament_profile = Generic PLA+ @ANKER
|
|
printer_technology = FFF
|
|
printer_settings_id =
|