mirror of
https://github.com/Santoku-Slicer/Profiles.git
synced 2026-07-07 16:59:47 +00:00
Dark98
43 lines
2.9 KiB
INI
43 lines
2.9 KiB
INI
[printer:Anycubic Mega Zero]
|
|
inherits = *common_mega0*
|
|
printer_model = MEGA0
|
|
printer_variant = 0.4
|
|
max_layer_height = 0.3
|
|
min_layer_height = 0.1
|
|
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_MEGA0
|
|
bed_shape = 0x0,220x0,220x220,0x220
|
|
max_print_height = 250
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 500
|
|
machine_max_acceleration_retracting = 500
|
|
machine_max_acceleration_x = 500
|
|
machine_max_acceleration_y = 500
|
|
machine_max_acceleration_z = 100
|
|
machine_max_feedrate_e = 25
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 5
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
nozzle_diameter = 0.4
|
|
retract_before_travel = 2
|
|
retract_layer_change = 0
|
|
retract_length = 7
|
|
retract_speed = 30
|
|
retract_lift = 0.2
|
|
deretract_speed = 30
|
|
retract_before_wipe = 70%
|
|
default_print_profile = 0.20mm NORMAL @MEGA0
|
|
default_filament_profile = Anycubic PLA @MEGA0
|
|
start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
|
|
end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n
|
|
|
|
## Anycubic i3 Mega and i3 Mega S
|
|
## Author: https://github.com/Igami
|
|
## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4619
|
|
|