Profiles/profile_sources/non-prusa-fff/RatRig/filament/PunkFil PETG @0.6 V2.ini

[filament:PunkFil PETG @0.6 V2]
bed_temperature = 80
bridge_fan_speed = 80
chamber_minimal_temperature = 0
chamber_temperature = 0
compatible_printers_condition = nozzle_diameter[0]==0.6
cooling = 1
disable_fan_first_layers = 2
enable_dynamic_fan_speeds = 1
end_filament_gcode = ""
extrusion_multiplier = 0.93
fan_always_on = 1
fan_below_layer_time = 15
filament_abrasive = 0
filament_colour = #ceff00
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 24.5
filament_density = 1.27
filament_deretract_speed = nil
filament_diameter = 1.75
filament_infill_max_crossing_speed = 140
filament_infill_max_speed = 200
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 30
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_purge_multiplier = 100%
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 1.5
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_seam_gap_distance = nil
filament_settings_id = ""
filament_shrinkage_compensation_xy = 0%
filament_shrinkage_compensation_z = 0%
filament_soluble = 0
filament_spool_weight = 0
filament_stamping_distance = 0
filament_stamping_loading_speed = 20
filament_toolchange_delay = 0
filament_travel_lift_before_obstacle = nil
filament_travel_max_lift = nil
filament_travel_ramping_lift = nil
filament_travel_slope = nil
filament_type = PETG
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = RatRig
filament_wipe = nil
first_layer_bed_temperature = 80
first_layer_temperature = 245
full_fan_speed_layer = 0
idle_temperature = nil
inherits = 
max_fan_speed = 70
min_fan_speed = 40
min_print_speed = 15
overhang_fan_speed_0 = 60
overhang_fan_speed_1 = 60
overhang_fan_speed_2 = 40
overhang_fan_speed_3 = 40
slowdown_below_layer_time = 12
start_filament_gcode = {if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.012{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_300_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.026{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.033{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_400_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.035{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_XY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.032{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_HY_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_QUALITY).*/}SET_PRESSURE_ADVANCE ADVANCE=0.03{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_SPEED).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}{if printer_notes=~/.*(RR_VC4_500_IDEX_06N).*/ and notes=~/.*(RR_BIG).*/}SET_PRESSURE_ADVANCE ADVANCE=0.025{endif}
temperature = 250