Profiles/repos/orcaslicer-fff/Orca Arena Printer/02.03.02.60.ini

[vendor]
repo_id = orcaslicer-fff
name = Orca Arena Printer
config_version = 02.03.02.60
description = Orca Arena configuration files
force_update = 0

[printer_model:Orca Arena X1 Carbon]
model_id = orca_arena_x1c
url = 
nozzle_diameter = 0.4;0.2;0.6;0.8
machine_tech = FFF
family = ARENA-3DP
bed_model = 
bed_texture = 
hotend_model = 
default_materials = OrcaArena Generic PLA Silk;OrcaArena Generic PLA;Arena PLA Matte @Arena X1C;Arena PLA Basic @Arena X1C;Arena ABS @Arena X1C;Arena PC @Arena X1C;Arena Support W @Arena X1C;Arena TPU 95A @Arena X1C;PolyTerra PLA @Arena X1C;PolyLite PLA @Arena X1C;

[printer:fdm_machine_common]
from = system
instantiation = false
printer_technology = FFF
deretraction_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 100
machine_max_speed_e = 60
machine_max_speed_x = 500
machine_max_speed_y = 500
machine_max_speed_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 3
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 65
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 140
nozzle_diameter = 0.4
printer_settings_id = 
printer_variant = 0.4
retraction_minimum_travel = 2
retract_before_wipe = 70%
retract_when_changing_layer = 1
retraction_length = 1
retract_length_toolchange = 1
z_hop = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 60
single_extruder_multi_material = 1
change_filament_gcode = 
wipe = 1
default_print_profile = 0.16mm Optimal @Orca Arena X1 Carbon 0.4 nozzle
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

machine_start_gcode = G0 Z20 F9000
G92 E0; G1 E-10 F1200
G28
M970 Q1 A10 B10 C130 K0
M970 Q1 A10 B131 C250 K1
M974 Q1 S1 P0
M970 Q0 A10 B10 C130 H20 K0
M970 Q0 A10 B131 C250 K1
M974 Q0 S1 P0
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G29 ;Home
G90;
G92 E0 ;Reset Extruder 
G1 Z2.0 F3000 ;Move Z Axis up 
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
M109 S205;
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder 
G1 X110 Y110 Z2.0 F3000 ;Move Z Axis up
machine_end_gcode = M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600; retract 
G91
G1 Z3;
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
M106 S0 ; turn off fan
G90 
G0 X110 Y200 F3600 
print_end

[printer:fdm_bbl_3dp_001_common]
inherits = fdm_machine_common
from = system
instantiation = false
printable_area = 0x0,256x0,256x256,0x256
auxiliary_fan = 0
gcode_flavor = klipper
bed_exclude_area = 0x0
default_filament_profile = Arena PLA Basic @Arena X1C
default_print_profile = 0.16mm Optimal @Arena X1C
extruder_colour = #018001
extruder_offset = 0x0
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 20000,20000
machine_max_acceleration_retracting = 5000,5000
machine_max_acceleration_travel = 20000,20000
machine_max_acceleration_x = 20000,20000
machine_max_acceleration_y = 20000,20000
machine_max_acceleration_z = 500,200
machine_max_speed_e = 30,30
machine_max_speed_x = 500,200
machine_max_speed_y = 500,200
machine_max_speed_z = 20,20
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 9,9
machine_max_jerk_y = 9,9
machine_max_jerk_z = 3,3
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
min_layer_height = 0.08
printable_height = 250
extruder_clearance_radius = 68
extruder_clearance_height_to_rod = 36
extruder_clearance_height_to_lid = 90
nozzle_volume = 107
nozzle_diameter = 0.4
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
retraction_minimum_travel = 1
retract_before_wipe = 0%
retract_when_changing_layer = 1
retraction_length = 0.8
retract_length_toolchange = 2
z_hop = 0.4
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retraction_speed = 30
deretraction_speed = 30
z_hop_types = Spiral Lift
nozzle_type = hardened_steel
silent_mode = 0
single_extruder_multi_material = 1
machine_start_gcode = M190 S[bed_temperature_initial_layer_single]
M109 S[nozzle_temperature_initial_layer]
PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]

machine_end_gcode = PRINT_END
layer_change_gcode = ;AFTER_LAYER_CHANGE
;[layer_z]
before_layer_change_gcode = ;BEFORE_LAYER_CHANGE
;[layer_z]
G92 E0

wipe = 1

[printer:Orca Arena X1 Carbon 0.4 nozzle]
inherits = fdm_bbl_3dp_001_common
from = system
setting_id = GM001
instantiation = true
printer_model = Orca Arena X1 Carbon
default_filament_profile = Arena PLA Basic @Arena X1C
default_print_profile = 0.20mm Standard @Arena X1C
nozzle_diameter = 0.4
extruder_offset = 0x0
machine_max_speed_z = 20,20
scan_first_layer = 1
machine_load_filament_time = 29
machine_unload_filament_time = 28
nozzle_type = hardened_steel
nozzle_hrc = 55
auxiliary_fan = 0

[printer:Orca Arena X1 Carbon 0.2 nozzle]
inherits = Orca Arena X1 Carbon 0.4 nozzle
from = system
setting_id = GM002
instantiation = true
nozzle_diameter = 0.2
printer_variant = 0.2
printer_model = Orca Arena X1 Carbon
default_filament_profile = Arena PLA Basic @Arena X1C 0.2 nozzle
default_print_profile = 0.10mm Standard @Arena X1C 0.2 nozzle
max_layer_height = 0.14
min_layer_height = 0.04
retraction_length = 0.4
retraction_minimum_travel = 5
nozzle_type = stainless_steel
nozzle_hrc = 20

[printer:Orca Arena X1 Carbon 0.6 nozzle]
inherits = Orca Arena X1 Carbon 0.4 nozzle
from = system
setting_id = GM005
instantiation = true
nozzle_diameter = 0.6
printer_variant = 0.6
printer_model = Orca Arena X1 Carbon
default_filament_profile = Arena PLA Basic @Arena X1C
default_print_profile = 0.30mm Standard @Arena X1C 0.6 nozzle
max_layer_height = 0.42
min_layer_height = 0.12
retraction_length = 1.4
retraction_minimum_travel = 3

[printer:Orca Arena X1 Carbon 0.8 nozzle]
inherits = Orca Arena X1 Carbon 0.4 nozzle
from = system
setting_id = GM004
instantiation = true
nozzle_diameter = 0.8
printer_variant = 0.8
printer_model = Orca Arena X1 Carbon
default_filament_profile = Arena PLA Basic @Arena X1C 0.8 nozzle
default_print_profile = 0.40mm Standard @Arena X1C 0.8 nozzle
max_layer_height = 0.56
min_layer_height = 0.16
retraction_length = 3
retraction_minimum_travel = 1
retract_length_toolchange = 3

[print:fdm_process_common]
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
bridge_flow = 0.95
bridge_speed = 25
brim_width = 5
compatible_printers = 
print_sequence = by layer
default_acceleration = 10000
bridge_no_support = 0
elefant_foot_compensation = 0.1
outer_wall_line_width = 0.42
outer_wall_speed = 120
line_width = 0.45
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
initial_layer_line_width = 0.42
initial_layer_print_height = 0.2
initial_layer_speed = 20
gap_infill_speed = 30
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 15%
sparse_infill_speed = 50
interface_shells = 0
detect_overhang_wall = 0
reduce_infill_retraction = 0
filename_format = {input_filename_base}.gcode
wall_loops = 3
inner_wall_line_width = 0.45
inner_wall_speed = 40
print_settings_id = 
raft_layers = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 2
minimum_sparse_infill_area = 0
internal_solid_infill_line_width = 0.45
internal_solid_infill_speed = 40
spiral_mode = 0
standby_temperature_delta = -5
enable_support = 0
support_filament = 0
support_line_width = 0.42
support_interface_filament = 0
support_on_build_plate_only = 0
support_top_z_distance = 0.15
support_interface_loop_pattern = 0
support_interface_top_layers = 2
support_interface_spacing = 0
support_interface_speed = 80
support_interface_pattern = auto
support_base_pattern = default
support_base_pattern_spacing = 2
support_speed = 40
support_threshold_angle = 30
support_object_xy_distance = 0.5
detect_thin_wall = 0
top_surface_line_width = 0.42
top_surface_speed = 30
travel_speed = 400
enable_prime_tower = 1
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
exclude_object = 1

[print:fdm_process_arena_common]
inherits = fdm_process_common
from = system
instantiation = false
adaptive_layer_height = 0
reduce_crossing_wall = 0
max_travel_detour_distance = 0
bottom_surface_pattern = monotonic
bottom_shell_layers = 3
bottom_shell_thickness = 0
bridge_flow = 0.95
bridge_speed = 50
brim_width = 5
brim_object_gap = 0.1
compatible_printers = 
compatible_printers_condition = 
print_sequence = by layer
default_acceleration = 10000
bridge_no_support = 0
draft_shield = disabled
elefant_foot_compensation = 0
enable_arc_fitting = 1
outer_wall_line_width = 0.42
outer_wall_speed = 120
outer_wall_acceleration = 5000
inner_wall_acceleration = 5000
wall_infill_order = inner wall/outer wall/infill
line_width = 0.42
infill_direction = 45
sparse_infill_density = 15%
sparse_infill_pattern = crosshatch
internal_bridge_support_thickness = 0.8
initial_layer_acceleration = 500
initial_layer_line_width = 0.5
initial_layer_print_height = 0.2
initial_layer_speed = 30
gap_infill_speed = 50
infill_combination = 0
sparse_infill_line_width = 0.45
infill_wall_overlap = 15%
sparse_infill_speed = 250
interface_shells = 0
ironing_flow = 10%
ironing_spacing = 0.15
ironing_speed = 30
ironing_type = no ironing
layer_height = 0.2
reduce_infill_retraction = 1
filename_format = {input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode
detect_overhang_wall = 1
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 30
overhang_4_4_speed = 10
only_one_wall_top = 1
inner_wall_line_width = 0.45
inner_wall_speed = 150
wall_loops = 3
print_settings_id = 
raft_layers = 0
seam_position = aligned
skirt_distance = 2
skirt_height = 1
skirt_loops = 0
minimum_sparse_infill_area = 15
internal_solid_infill_line_width = 0.42
internal_solid_infill_speed = 150
spiral_mode = 0
initial_layer_infill_speed = 60
standby_temperature_delta = -5
enable_support = 0
resolution = 0.012
support_type = normal(auto)
support_style = default
support_on_build_plate_only = 0
support_top_z_distance = 0.2
support_bottom_z_distance = 0.2
support_filament = 0
support_line_width = 0.42
support_interface_loop_pattern = 0
support_interface_filament = 0
support_interface_top_layers = 2
support_interface_bottom_layers = 2
support_interface_spacing = 0.5
support_expansion = 0
support_interface_speed = 80
support_base_pattern = default
support_base_pattern_spacing = 2.5
support_speed = 150
support_threshold_angle = 30
support_object_xy_distance = 0.35
tree_support_branch_diameter = 2
tree_support_branch_angle = 45
tree_support_wall_count = 1
detect_thin_wall = 0
top_surface_pattern = monotonicline
top_surface_line_width = 0.42
top_surface_acceleration = 2000
top_surface_speed = 200
top_shell_layers = 3
top_shell_thickness = 0.8
travel_speed = 500
enable_prime_tower = 1
wipe_tower_no_sparse_layers = 0
prime_tower_width = 60
xy_hole_compensation = 0
xy_contour_compensation = 0
gcode_label_objects = 0

[print:fdm_process_arena_0.06_nozzle_0.2]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.06
initial_layer_print_height = 0.1
wall_loops = 4
bottom_shell_layers = 5
top_shell_layers = 7
bridge_flow = 1
line_width = 0.22
outer_wall_line_width = 0.22
initial_layer_line_width = 0.25
sparse_infill_line_width = 0.22
inner_wall_line_width = 0.22
internal_solid_infill_line_width = 0.22
support_line_width = 0.22
top_surface_line_width = 0.22
initial_layer_speed = 40
initial_layer_infill_speed = 70
sparse_infill_speed = 100
top_surface_speed = 150

[print:fdm_process_arena_0.08]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.08
elefant_foot_compensation = 0.15
bottom_shell_layers = 7
top_shell_layers = 9
bridge_flow = 1
ironing_flow = 8%
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 200
inner_wall_speed = 350
sparse_infill_speed = 450
internal_solid_infill_speed = 350
top_surface_speed = 200
gap_infill_speed = 350
overhang_1_4_speed = 60
overhang_2_4_speed = 30
overhang_3_4_speed = 10
overhang_4_4_speed = 10
support_threshold_angle = 30

[print:fdm_process_arena_0.08_nozzle_0.2]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.08
initial_layer_print_height = 0.1
wall_loops = 4
bottom_shell_layers = 5
top_shell_layers = 7
bridge_flow = 1
line_width = 0.22
outer_wall_line_width = 0.22
initial_layer_line_width = 0.25
sparse_infill_line_width = 0.22
inner_wall_line_width = 0.22
internal_solid_infill_line_width = 0.22
support_line_width = 0.22
top_surface_line_width = 0.22
initial_layer_speed = 40
initial_layer_infill_speed = 70
sparse_infill_speed = 100
top_surface_speed = 150

[print:fdm_process_arena_0.10_nozzle_0.2]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.1
initial_layer_print_height = 0.1
wall_loops = 4
bottom_shell_layers = 5
top_shell_layers = 7
bridge_flow = 1
line_width = 0.22
outer_wall_line_width = 0.22
initial_layer_line_width = 0.25
sparse_infill_line_width = 0.22
inner_wall_line_width = 0.22
internal_solid_infill_line_width = 0.22
support_line_width = 0.22
top_surface_line_width = 0.22
initial_layer_speed = 40
initial_layer_infill_speed = 70
sparse_infill_speed = 100
top_surface_speed = 150

[print:fdm_process_arena_0.12]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.12
bottom_shell_layers = 5
elefant_foot_compensation = 0.15
top_shell_layers = 5
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 200
inner_wall_speed = 350
sparse_infill_speed = 430
internal_solid_infill_speed = 350
top_surface_speed = 200
gap_infill_speed = 350
overhang_1_4_speed = 60
overhang_2_4_speed = 30
overhang_3_4_speed = 10
overhang_4_4_speed = 10
support_threshold_angle = 30

[print:fdm_process_arena_0.12_nozzle_0.2]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.12
initial_layer_print_height = 0.1
wall_loops = 4
bottom_shell_layers = 5
top_shell_layers = 7
bridge_flow = 1
line_width = 0.22
outer_wall_line_width = 0.22
initial_layer_line_width = 0.25
sparse_infill_line_width = 0.22
inner_wall_line_width = 0.22
internal_solid_infill_line_width = 0.22
support_line_width = 0.22
top_surface_line_width = 0.22
initial_layer_speed = 40
initial_layer_infill_speed = 70
sparse_infill_speed = 100
top_surface_speed = 150

[print:fdm_process_arena_0.14_nozzle_0.2]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.14
initial_layer_print_height = 0.1
wall_loops = 4
bottom_shell_layers = 5
top_shell_layers = 7
bridge_flow = 1
line_width = 0.22
outer_wall_line_width = 0.22
initial_layer_line_width = 0.25
sparse_infill_line_width = 0.22
inner_wall_line_width = 0.22
internal_solid_infill_line_width = 0.22
support_line_width = 0.22
top_surface_line_width = 0.22
initial_layer_speed = 40
initial_layer_infill_speed = 70
sparse_infill_speed = 100
top_surface_speed = 150

[print:fdm_process_arena_0.16]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.16
elefant_foot_compensation = 0.15
bottom_shell_layers = 4
top_shell_layers = 4
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 200
inner_wall_speed = 300
sparse_infill_speed = 330
internal_solid_infill_speed = 300
top_surface_speed = 200
gap_infill_speed = 300
overhang_1_4_speed = 60
overhang_2_4_speed = 30
overhang_3_4_speed = 10
overhang_4_4_speed = 10
support_threshold_angle = 30

[print:fdm_process_arena_0.18_nozzle_0.6]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.18
initial_layer_print_height = 0.3
wall_loops = 2
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.62
outer_wall_line_width = 0.62
initial_layer_line_width = 0.62
sparse_infill_line_width = 0.62
inner_wall_line_width = 0.62
internal_solid_infill_line_width = 0.62
support_line_width = 0.62
top_surface_line_width = 0.62
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 15
overhang_4_4_speed = 10

[print:fdm_process_arena_0.20]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.2
elefant_foot_compensation = 0.15
bottom_shell_layers = 3
top_shell_layers = 3
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 200
inner_wall_speed = 300
sparse_infill_speed = 270
internal_solid_infill_speed = 250
top_surface_speed = 200
gap_infill_speed = 250

[print:fdm_process_arena_0.24]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.24
elefant_foot_compensation = 0.15
top_surface_line_width = 0.45
bottom_shell_layers = 3
top_shell_layers = 3
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 200
inner_wall_speed = 230
sparse_infill_speed = 230
internal_solid_infill_speed = 230
top_surface_speed = 200
gap_infill_speed = 230
support_threshold_angle = 30

[print:fdm_process_arena_0.24_nozzle_0.6]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.24
initial_layer_print_height = 0.3
wall_loops = 2
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.62
outer_wall_line_width = 0.62
initial_layer_line_width = 0.62
sparse_infill_line_width = 0.62
inner_wall_line_width = 0.62
internal_solid_infill_line_width = 0.62
support_line_width = 0.62
top_surface_line_width = 0.62
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 15
overhang_4_4_speed = 10

[print:fdm_process_arena_0.24_nozzle_0.8]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.24
initial_layer_print_height = 0.4
wall_loops = 2
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.82
outer_wall_line_width = 0.82
initial_layer_line_width = 0.82
sparse_infill_line_width = 0.82
inner_wall_line_width = 0.82
internal_solid_infill_line_width = 0.82
support_line_width = 0.82
top_surface_line_width = 0.82
top_surface_pattern = monotonicline
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 25
overhang_4_4_speed = 5

[print:fdm_process_arena_0.28]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.28
elefant_foot_compensation = 0.15
top_surface_line_width = 0.45
bottom_shell_layers = 3
top_shell_layers = 3
top_shell_thickness = 0.6
bridge_flow = 1
initial_layer_speed = 50
initial_layer_infill_speed = 105
outer_wall_speed = 200
inner_wall_speed = 200
sparse_infill_speed = 200
internal_solid_infill_speed = 200
top_surface_speed = 200
gap_infill_speed = 200
support_threshold_angle = 30

[print:fdm_process_arena_0.30_nozzle_0.6]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.3
initial_layer_print_height = 0.3
wall_loops = 3
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.62
outer_wall_line_width = 0.62
initial_layer_line_width = 0.62
sparse_infill_line_width = 0.62
inner_wall_line_width = 0.62
internal_solid_infill_line_width = 0.62
support_line_width = 0.62
top_surface_line_width = 0.62
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 15
overhang_4_4_speed = 10

[print:fdm_process_arena_0.32_nozzle_0.8]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.32
initial_layer_print_height = 0.3
wall_loops = 2
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.82
outer_wall_line_width = 0.82
initial_layer_line_width = 0.82
sparse_infill_line_width = 0.82
inner_wall_line_width = 0.82
internal_solid_infill_line_width = 0.82
support_line_width = 0.82
top_surface_line_width = 0.82
top_surface_pattern = monotonicline
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 25
overhang_4_4_speed = 5

[print:fdm_process_arena_0.36_nozzle_0.6]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.36
initial_layer_print_height = 0.3
wall_loops = 2
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.62
outer_wall_line_width = 0.62
initial_layer_line_width = 0.62
sparse_infill_line_width = 0.62
inner_wall_line_width = 0.62
internal_solid_infill_line_width = 0.62
support_line_width = 0.62
top_surface_line_width = 0.62
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 15
overhang_4_4_speed = 10

[print:fdm_process_arena_0.40_nozzle_0.8]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.4
initial_layer_print_height = 0.4
wall_loops = 3
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.82
outer_wall_line_width = 0.82
initial_layer_line_width = 0.82
sparse_infill_line_width = 0.82
inner_wall_line_width = 0.82
internal_solid_infill_line_width = 0.82
support_line_width = 0.82
top_surface_line_width = 0.82
top_surface_pattern = monotonicline
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 25
overhang_4_4_speed = 5

[print:fdm_process_arena_0.42_nozzle_0.6]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.42
initial_layer_print_height = 0.3
wall_loops = 2
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.62
outer_wall_line_width = 0.62
initial_layer_line_width = 0.62
sparse_infill_line_width = 0.62
inner_wall_line_width = 0.62
internal_solid_infill_line_width = 0.62
support_line_width = 0.62
top_surface_line_width = 0.62
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 15
overhang_4_4_speed = 10

[print:fdm_process_arena_0.48_nozzle_0.8]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.48
initial_layer_print_height = 0.4
wall_loops = 2
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.82
outer_wall_line_width = 0.82
initial_layer_line_width = 0.82
sparse_infill_line_width = 0.82
inner_wall_line_width = 0.82
internal_solid_infill_line_width = 0.82
support_line_width = 0.82
top_surface_line_width = 0.82
top_surface_pattern = monotonicline
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 25
overhang_4_4_speed = 5

[print:fdm_process_arena_0.56_nozzle_0.8]
inherits = fdm_process_arena_common
from = system
instantiation = false
layer_height = 0.56
initial_layer_print_height = 0.4
wall_loops = 2
bottom_shell_layers = 3
top_shell_layers = 3
bridge_flow = 1
line_width = 0.82
outer_wall_line_width = 0.82
initial_layer_line_width = 0.82
sparse_infill_line_width = 0.82
inner_wall_line_width = 0.82
internal_solid_infill_line_width = 0.82
support_line_width = 0.82
top_surface_line_width = 0.82
top_surface_pattern = monotonicline
initial_layer_speed = 35
initial_layer_infill_speed = 55
outer_wall_speed = 120
inner_wall_speed = 150
sparse_infill_speed = 100
internal_solid_infill_speed = 150
top_surface_speed = 150
gap_infill_speed = 50
bridge_speed = 30
overhang_1_4_speed = 0
overhang_2_4_speed = 50
overhang_3_4_speed = 25
overhang_4_4_speed = 5

[print:0.06mm Standard @Arena X1C 0.2 nozzle]
inherits = fdm_process_arena_0.06_nozzle_0.2
from = system
setting_id = GP024
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle,Orca Arena X1 0.2 nozzle

[print:0.08mm Extra Fine @Arena X1C]
inherits = fdm_process_arena_0.08
from = system
setting_id = GP001
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 0.4 nozzle

[print:0.08mm Standard @Arena X1C 0.2 nozzle]
inherits = fdm_process_arena_0.08_nozzle_0.2
from = system
setting_id = GP025
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle,Orca Arena X1 0.2 nozzle

[print:0.10mm Standard @Arena X1C 0.2 nozzle]
inherits = fdm_process_arena_0.10_nozzle_0.2
from = system
setting_id = GP007
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle,Orca Arena X1 0.2 nozzle

[print:0.12mm Fine @Arena X1C]
inherits = fdm_process_arena_0.12
from = system
setting_id = GP002
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 0.4 nozzle

[print:0.12mm Standard @Arena X1C 0.2 nozzle]
inherits = fdm_process_arena_0.12_nozzle_0.2
from = system
setting_id = GP026
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle,Orca Arena X1 0.2 nozzle

[print:0.14mm Standard @Arena X1C 0.2 nozzle]
inherits = fdm_process_arena_0.14_nozzle_0.2
from = system
setting_id = GP027
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle,Orca Arena X1 0.2 nozzle

[print:0.16mm Optimal @Arena X1C]
inherits = fdm_process_arena_0.16
from = system
setting_id = GP003
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 0.4 nozzle

[print:0.18mm Standard @Arena X1C 0.6 nozzle]
inherits = fdm_process_arena_0.18_nozzle_0.6
from = system
setting_id = GP028
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 0.6 nozzle

[print:0.20mm Arena Support W @Arena X1C]
inherits = fdm_process_arena_0.20
from = system
setting_id = GP008
instantiation = true
enable_support = 1
support_interface_top_layers = 3
support_top_z_distance = 0.2
support_interface_loop_pattern = 1
support_interface_spacing = 0
support_interface_speed = 80
support_filament = 0
support_interface_filament = 0
enable_prime_tower = 1
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 0.4 nozzle

[print:0.20mm Standard @Arena X1C]
inherits = fdm_process_arena_0.20
from = system
setting_id = GP004
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 0.4 nozzle

[print:0.20mm Strength @Arena X1C]
inherits = fdm_process_arena_0.20
from = system
setting_id = GP013
instantiation = true
outer_wall_speed = 60
wall_loops = 6
sparse_infill_density = 25%
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 0.4 nozzle

[print:0.24mm Draft @Arena X1C]
inherits = fdm_process_arena_0.24
from = system
setting_id = GP005
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 0.4 nozzle

[print:0.24mm Standard @Arena X1C 0.6 nozzle]
inherits = fdm_process_arena_0.24_nozzle_0.6
from = system
setting_id = GP029
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 0.6 nozzle

[print:0.24mm Standard @Arena X1C 0.8 nozzle]
inherits = fdm_process_arena_0.24_nozzle_0.8
from = system
setting_id = GP032
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle,Orca Arena X1 0.8 nozzle

[print:0.28mm Extra Draft @Arena X1C]
inherits = fdm_process_arena_0.28
from = system
setting_id = GP006
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 0.4 nozzle

[print:0.30mm Standard @Arena X1C 0.6 nozzle]
inherits = fdm_process_arena_0.30_nozzle_0.6
from = system
setting_id = GP010
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle

[print:0.30mm Strength @Arena X1C 0.6 nozzle]
inherits = fdm_process_arena_0.30_nozzle_0.6
from = system
setting_id = GP036
instantiation = true
wall_loops = 4
sparse_infill_density = 25%
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 0.6 nozzle

[print:0.32mm Standard @Arena X1C 0.8 nozzle]
inherits = fdm_process_arena_0.32_nozzle_0.8
from = system
setting_id = GP033
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle,Orca Arena X1 0.8 nozzle

[print:0.36mm Standard @Arena X1C 0.6 nozzle]
inherits = fdm_process_arena_0.36_nozzle_0.6
from = system
setting_id = GP030
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 0.6 nozzle

[print:0.40mm Standard @Arena X1C 0.8 nozzle]
inherits = fdm_process_arena_0.40_nozzle_0.8
from = system
setting_id = GP009
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle

[print:0.42mm Standard @Arena X1C 0.6 nozzle]
inherits = fdm_process_arena_0.42_nozzle_0.6
from = system
setting_id = GP031
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 0.6 nozzle

[print:0.48mm Standard @Arena X1C 0.8 nozzle]
inherits = fdm_process_arena_0.48_nozzle_0.8
from = system
setting_id = GP034
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle,Orca Arena X1 0.8 nozzle

[print:0.56mm Standard @Arena X1C 0.8 nozzle]
inherits = fdm_process_arena_0.56_nozzle_0.8
from = system
setting_id = GP035
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle,Orca Arena X1 0.8 nozzle

[filament:fdm_filament_common]
from = system
instantiation = false
filament_is_support = 0
required_nozzle_HRC = 3
cool_plate_temp = 60
eng_plate_temp = 60
hot_plate_temp = 60
textured_plate_temp = 60
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 60
hot_plate_temp_initial_layer = 60
textured_plate_temp_initial_layer = 60
overhang_fan_threshold = 95%
overhang_fan_speed = 100
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
filament_end_gcode = ; filament end gcode 
M106 P3 S0

filament_flow_ratio = 1
reduce_fan_stop_start_freq = 0
fan_cooling_layer_time = 60
filament_cost = 0
filament_density = 0
filament_deretraction_speed = nil
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_retraction_minimum_travel = nil
filament_retract_before_wipe = nil
filament_retract_when_changing_layer = nil
filament_retraction_length = nil
filament_z_hop = nil
filament_z_hop_types = nil
filament_retract_restart_extra = nil
filament_retraction_speed = nil
filament_settings_id = 
filament_soluble = 0
filament_type = PLA
filament_vendor = Generic
filament_wipe = nil
filament_wipe_distance = nil
nozzle_temperature_initial_layer = 200
full_fan_speed_layer = 0
fan_max_speed = 100
fan_min_speed = 35
slow_down_min_speed = 10
slow_down_layer_time = 8
filament_start_gcode = ; Filament gcode

nozzle_temperature = 200
temperature_vitrification = 100

[filament:fdm_filament_abs]
inherits = fdm_filament_common
from = system
instantiation = false
cool_plate_temp = 0
eng_plate_temp = 90
hot_plate_temp = 90
textured_plate_temp = 90
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 90
hot_plate_temp_initial_layer = 90
textured_plate_temp_initial_layer = 90
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 30
filament_max_volumetric_speed = 28.6
filament_type = ABS
filament_density = 1.04
filament_cost = 20
nozzle_temperature_initial_layer = 260
reduce_fan_stop_start_freq = 1
fan_max_speed = 80
fan_min_speed = 10
overhang_fan_threshold = 25%
overhang_fan_speed = 80
nozzle_temperature = 270
temperature_vitrification = 100
nozzle_temperature_range_low = 240
nozzle_temperature_range_high = 280
slow_down_min_speed = 10
slow_down_layer_time = 3

[filament:fdm_filament_asa]
inherits = fdm_filament_common
from = system
instantiation = false
cool_plate_temp = 0
eng_plate_temp = 90
hot_plate_temp = 90
textured_plate_temp = 90
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 90
hot_plate_temp_initial_layer = 90
textured_plate_temp_initial_layer = 90
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 35
filament_max_volumetric_speed = 28.6
filament_type = ASA
filament_density = 1.04
filament_cost = 20
nozzle_temperature_initial_layer = 260
reduce_fan_stop_start_freq = 1
fan_max_speed = 80
fan_min_speed = 10
overhang_fan_threshold = 25%
overhang_fan_speed = 80
nozzle_temperature = 260
temperature_vitrification = 100
nozzle_temperature_range_low = 240
nozzle_temperature_range_high = 280
slow_down_min_speed = 10
slow_down_layer_time = 3

[filament:fdm_filament_pa]
inherits = fdm_filament_common
from = system
instantiation = false
required_nozzle_HRC = 40
cool_plate_temp = 0
eng_plate_temp = 100
hot_plate_temp = 100
textured_plate_temp = 100
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 100
hot_plate_temp_initial_layer = 100
textured_plate_temp_initial_layer = 100
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 4
filament_max_volumetric_speed = 8
filament_type = PA
filament_density = 1.04
filament_cost = 20
nozzle_temperature_initial_layer = 290
reduce_fan_stop_start_freq = 0
fan_max_speed = 60
fan_min_speed = 0
overhang_fan_speed = 30
nozzle_temperature = 290
temperature_vitrification = 108
nozzle_temperature_range_low = 260
nozzle_temperature_range_high = 300
slow_down_min_speed = 10
slow_down_layer_time = 2

[filament:fdm_filament_pc]
inherits = fdm_filament_common
from = system
instantiation = false
cool_plate_temp = 0
eng_plate_temp = 110
hot_plate_temp = 110
textured_plate_temp = 110
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 110
hot_plate_temp_initial_layer = 110
textured_plate_temp_initial_layer = 110
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 30
filament_max_volumetric_speed = 23.2
filament_type = PC
filament_density = 1.04
filament_cost = 20
nozzle_temperature_initial_layer = 270
reduce_fan_stop_start_freq = 1
fan_max_speed = 60
fan_min_speed = 10
overhang_fan_threshold = 25%
overhang_fan_speed = 60
nozzle_temperature = 280
temperature_vitrification = 120
nozzle_temperature_range_low = 260
nozzle_temperature_range_high = 290
slow_down_min_speed = 10
slow_down_layer_time = 2

[filament:fdm_filament_pet]
inherits = fdm_filament_common
from = system
instantiation = false
cool_plate_temp = 60
eng_plate_temp = 0
hot_plate_temp = 80
textured_plate_temp = 80
cool_plate_temp_initial_layer = 60
eng_plate_temp_initial_layer = 0
hot_plate_temp_initial_layer = 80
textured_plate_temp_initial_layer = 80
slow_down_for_layer_cooling = 1
close_fan_the_first_x_layers = 3
fan_cooling_layer_time = 20
filament_max_volumetric_speed = 25
filament_type = PETG
filament_density = 1.27
filament_cost = 30
nozzle_temperature_initial_layer = 255
reduce_fan_stop_start_freq = 1
fan_max_speed = 100
fan_min_speed = 20
overhang_fan_speed = 100
nozzle_temperature = 255
temperature_vitrification = 70
nozzle_temperature_range_low = 220
nozzle_temperature_range_high = 260
filament_start_gcode = ; filament start gcode
{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180
{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255
{endif};Prevent PLA from jamming

[filament:fdm_filament_pla]
inherits = fdm_filament_common
from = system
instantiation = false
fan_cooling_layer_time = 100
filament_max_volumetric_speed = 12
filament_type = PLA
filament_density = 1.24
filament_cost = 20
cool_plate_temp = 35
eng_plate_temp = 0
hot_plate_temp = 55
textured_plate_temp = 55
cool_plate_temp_initial_layer = 35
eng_plate_temp_initial_layer = 0
hot_plate_temp_initial_layer = 55
textured_plate_temp_initial_layer = 55
nozzle_temperature_initial_layer = 220
reduce_fan_stop_start_freq = 1
slow_down_for_layer_cooling = 1
fan_max_speed = 100
fan_min_speed = 100
overhang_fan_speed = 100
overhang_fan_threshold = 50%
close_fan_the_first_x_layers = 1
nozzle_temperature = 220
temperature_vitrification = 55
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 240
slow_down_min_speed = 10
slow_down_layer_time = 4
additional_cooling_fan_speed = 70
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180
{endif}

[filament:fdm_filament_pva]
inherits = fdm_filament_common
from = system
instantiation = false
cool_plate_temp = 45
eng_plate_temp = 0
hot_plate_temp = 55
textured_plate_temp = 55
cool_plate_temp_initial_layer = 45
eng_plate_temp_initial_layer = 0
hot_plate_temp_initial_layer = 55
textured_plate_temp_initial_layer = 55
fan_cooling_layer_time = 100
filament_max_volumetric_speed = 15
filament_soluble = 1
filament_is_support = 1
filament_type = PVA
filament_density = 1.24
filament_cost = 20
nozzle_temperature_initial_layer = 220
reduce_fan_stop_start_freq = 1
slow_down_for_layer_cooling = 1
fan_max_speed = 100
fan_min_speed = 100
overhang_fan_speed = 100
overhang_fan_threshold = 50%
close_fan_the_first_x_layers = 1
nozzle_temperature = 220
temperature_vitrification = 55
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 240
slow_down_min_speed = 10
slow_down_layer_time = 4
additional_cooling_fan_speed = 70
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180
{endif}

[filament:fdm_filament_tpu]
inherits = fdm_filament_common
from = system
instantiation = false
cool_plate_temp = 30
eng_plate_temp = 30
hot_plate_temp = 35
textured_plate_temp = 35
cool_plate_temp_initial_layer = 30
eng_plate_temp_initial_layer = 30
hot_plate_temp_initial_layer = 35
textured_plate_temp_initial_layer = 35
fan_cooling_layer_time = 100
filament_max_volumetric_speed = 15
filament_type = TPU
filament_density = 1.24
filament_cost = 20
filament_retraction_length = 0.4
nozzle_temperature_initial_layer = 240
reduce_fan_stop_start_freq = 1
slow_down_for_layer_cooling = 1
fan_max_speed = 100
fan_min_speed = 100
overhang_fan_speed = 100
additional_cooling_fan_speed = 70
close_fan_the_first_x_layers = 1
nozzle_temperature = 240
temperature_vitrification = 35
nozzle_temperature_range_low = 200
nozzle_temperature_range_high = 250
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180
{endif}

[filament:Arena ABS @base]
inherits = fdm_filament_abs
from = system
filament_id = GFB00
instantiation = false
filament_flow_ratio = 0.95
filament_cost = 24.99
filament_vendor = Orca Arena

[filament:OrcaArena Generic ABS @base]
inherits = fdm_filament_abs
from = system
filament_id = GFB99
instantiation = false
filament_flow_ratio = 0.95
filament_max_volumetric_speed = 16

[filament:OrcaArena Generic ASA @base]
inherits = fdm_filament_asa
from = system
filament_id = GFB98
instantiation = false
filament_flow_ratio = 0.95
filament_max_volumetric_speed = 12

[filament:Arena PA-CF @base]
inherits = fdm_filament_pa
from = system
filament_id = GFN03
instantiation = false
required_nozzle_HRC = 40
filament_vendor = Orca Arena
filament_density = 1.09
filament_flow_ratio = 0.96
nozzle_temperature_initial_layer = 280
overhang_fan_threshold = 0%
overhang_fan_speed = 40
filament_type = PA-CF
filament_cost = 84.99
nozzle_temperature = 280

[filament:Arena PAHT-CF @base]
inherits = fdm_filament_pa
from = system
filament_id = GFN04
instantiation = false
filament_max_volumetric_speed = 8
fan_max_speed = 30
fan_min_speed = 10
fan_cooling_layer_time = 5
full_fan_speed_layer = 2
required_nozzle_HRC = 40
filament_vendor = Orca Arena
filament_density = 1.06
filament_flow_ratio = 0.96
nozzle_temperature_initial_layer = 290
overhang_fan_threshold = 0%
overhang_fan_speed = 40
filament_type = PA-CF
filament_cost = 94.99
temperature_vitrification = 180
nozzle_temperature = 290

[filament:Arena Support G @base]
inherits = fdm_filament_pa
from = system
filament_id = GFS01
instantiation = false
required_nozzle_HRC = 3
filament_vendor = Orca Arena
filament_density = 1.22
filament_is_support = 1
nozzle_temperature_initial_layer = 280
nozzle_temperature = 280
fan_cooling_layer_time = 10
filament_cost = 34.99
slow_down_layer_time = 6

[filament:OrcaArena Generic PA]
inherits = fdm_filament_pa
from = system
setting_id = GFSN98
filament_id = GFN99
instantiation = true
required_nozzle_HRC = 3
nozzle_temperature_initial_layer = 280
nozzle_temperature = 280
filament_max_volumetric_speed = 16
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PA-CF]
inherits = fdm_filament_pa
from = system
setting_id = GFSN99
filament_id = GFN98
instantiation = true
filament_type = PA-CF
nozzle_temperature_initial_layer = 290
nozzle_temperature = 290
filament_max_volumetric_speed = 8
fan_max_speed = 30
fan_min_speed = 10
overhang_fan_threshold = 0%
overhang_fan_speed = 40
fan_cooling_layer_time = 5
full_fan_speed_layer = 2
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PC @base]
inherits = fdm_filament_pc
from = system
filament_id = GFC00
instantiation = false
filament_vendor = Orca Arena
filament_cost = 39.99
filament_flow_ratio = 0.94

[filament:OrcaArena Generic PC @base]
inherits = fdm_filament_pc
from = system
filament_id = GFC99
instantiation = false
filament_max_volumetric_speed = 16
filament_flow_ratio = 0.94

[filament:Arena PET-CF @base]
inherits = fdm_filament_pet
from = system
filament_id = GFT01
instantiation = false
temperature_vitrification = 185
overhang_fan_threshold = 0%
overhang_fan_speed = 40
fan_max_speed = 30
fan_min_speed = 10
filament_max_volumetric_speed = 8
slow_down_layer_time = 2
fan_cooling_layer_time = 5
cool_plate_temp = 0
eng_plate_temp = 80
hot_plate_temp = 100
textured_plate_temp = 100
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 80
hot_plate_temp_initial_layer = 100
textured_plate_temp_initial_layer = 100
required_nozzle_HRC = 40
filament_vendor = Orca Arena
filament_type = PET-CF
filament_cost = 84.99
filament_density = 1.29
nozzle_temperature_range_low = 260
nozzle_temperature_range_high = 290
nozzle_temperature_initial_layer = 270
nozzle_temperature = 270

[filament:Arena PETG Basic @base]
inherits = fdm_filament_pet
from = system
filament_id = GFG00
instantiation = false
filament_flow_ratio = 0.95
temperature_vitrification = 70
overhang_fan_speed = 90
overhang_fan_threshold = 25%
fan_max_speed = 40
fan_min_speed = 10
filament_max_volumetric_speed = 8
slow_down_layer_time = 8
fan_cooling_layer_time = 30
cool_plate_temp = 0
eng_plate_temp = 70
hot_plate_temp = 70
textured_plate_temp = 70
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 70
hot_plate_temp_initial_layer = 70
textured_plate_temp_initial_layer = 70
filament_vendor = Orca Arena
filament_type = PETG
filament_cost = 24.99
filament_density = 1.25
nozzle_temperature_range_low = 240
nozzle_temperature_range_high = 270
nozzle_temperature_initial_layer = 255
nozzle_temperature = 255
filament_start_gcode = ; filament start gcode
{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255
{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180
{endif}

[filament:Arena PETG-CF @base]
inherits = fdm_filament_pet
from = system
filament_id = GFG50
instantiation = false
filament_flow_ratio = 0.95
temperature_vitrification = 75
overhang_fan_threshold = 25%
overhang_fan_speed = 90
cool_plate_temp = 0
eng_plate_temp = 70
hot_plate_temp = 70
textured_plate_temp = 70
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 70
hot_plate_temp_initial_layer = 70
textured_plate_temp_initial_layer = 70
required_nozzle_HRC = 40
filament_vendor = Orca Arena
filament_type = PETG-CF
nozzle_temperature_range_low = 240
nozzle_temperature_range_high = 270
nozzle_temperature_initial_layer = 255
nozzle_temperature = 255
filament_cost = 34.99
filament_density = 1.25
fan_max_speed = 30
fan_min_speed = 0
filament_max_volumetric_speed = 14
slow_down_layer_time = 6
fan_cooling_layer_time = 20

[filament:OrcaArena Generic PETG @base]
inherits = fdm_filament_pet
from = system
filament_id = GFG99
instantiation = false
reduce_fan_stop_start_freq = 1
slow_down_for_layer_cooling = 1
fan_cooling_layer_time = 30
overhang_fan_speed = 90
overhang_fan_threshold = 25%
fan_max_speed = 90
fan_min_speed = 40
slow_down_min_speed = 10
slow_down_layer_time = 8
filament_flow_ratio = 0.95
filament_max_volumetric_speed = 10
nozzle_temperature_range_high = 270
cool_plate_temp = 0
eng_plate_temp = 70
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 70
hot_plate_temp = 70
textured_plate_temp = 70
textured_plate_temp_initial_layer = 70
hot_plate_temp_initial_layer = 70
filament_start_gcode =  ; filament start gcode
{if (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S255
{elsif (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180
{endif}

[filament:OrcaArena Generic PETG-CF @base]
inherits = fdm_filament_pet
from = system
filament_id = GFG98
instantiation = false
filament_flow_ratio = 0.95
temperature_vitrification = 75
overhang_fan_threshold = 25%
overhang_fan_speed = 90
cool_plate_temp = 0
eng_plate_temp = 70
hot_plate_temp = 70
textured_plate_temp = 70
cool_plate_temp_initial_layer = 0
eng_plate_temp_initial_layer = 70
hot_plate_temp_initial_layer = 70
textured_plate_temp_initial_layer = 70
required_nozzle_HRC = 40
filament_vendor = Orca Arena
filament_type = PETG-CF
nozzle_temperature_range_low = 240
nozzle_temperature_range_high = 270
nozzle_temperature_initial_layer = 255
nozzle_temperature = 255
filament_cost = 34.99
filament_density = 1.25
fan_max_speed = 30
fan_min_speed = 0
filament_max_volumetric_speed = 10
slow_down_layer_time = 6
fan_cooling_layer_time = 20

[filament:Arena PLA Basic @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA00
instantiation = false
filament_vendor = Orca Arena
filament_cost = 24.99
filament_flow_ratio = 0.98
filament_density = 1.26

[filament:Arena PLA Impact @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA03
instantiation = false
filament_vendor = Orca Arena
filament_cost = 25.4
filament_density = 1.24
filament_flow_ratio = 0.95

[filament:Arena PLA Marble @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA07
instantiation = false
filament_vendor = Orca Arena
filament_cost = 29.99
filament_density = 1.22
filament_flow_ratio = 0.98
filament_max_volumetric_speed = 12

[filament:Arena PLA Matte @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA01
instantiation = false
filament_vendor = Orca Arena
filament_cost = 24.99
filament_density = 1.32
filament_flow_ratio = 0.98

[filament:Arena PLA Metal @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA02
instantiation = false
filament_vendor = Orca Arena
filament_cost = 29.99
filament_flow_ratio = 0.98
filament_density = 1.25

[filament:Arena PLA Silk @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA05
instantiation = false
filament_vendor = Orca Arena
required_nozzle_HRC = 3
filament_flow_ratio = 0.98
filament_density = 1.32
filament_cost = 29.99
nozzle_temperature_initial_layer = 230
nozzle_temperature = 230

[filament:Arena PLA Sparkle @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA08
instantiation = false
filament_vendor = Orca Arena
filament_cost = 29.99
filament_density = 1.26
filament_flow_ratio = 0.98
filament_max_volumetric_speed = 12

[filament:Arena PLA Tough @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA09
instantiation = false
filament_vendor = Orca Arena
filament_cost = 28.99
filament_flow_ratio = 0.98
filament_density = 1.26

[filament:Arena PLA-CF @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA50
instantiation = false
filament_vendor = Orca Arena
cool_plate_temp = 45
cool_plate_temp_initial_layer = 45
filament_cost = 34.99
filament_flow_ratio = 0.98
filament_density = 1.22
required_nozzle_HRC = 40
slow_down_layer_time = 8
nozzle_temperature_range_low = 210
nozzle_temperature_range_high = 250
additional_cooling_fan_speed = 0
filament_type = PLA-CF

[filament:Arena Support W @base]
inherits = fdm_filament_pla
from = system
filament_id = GFS00
instantiation = false
filament_vendor = Orca Arena
filament_density = 1.30
filament_is_support = 1
cool_plate_temp = 40
cool_plate_temp_initial_layer = 40
filament_cost = 69.98
slow_down_layer_time = 8

[filament:OrcaArena Generic PLA @base]
inherits = fdm_filament_pla
from = system
filament_id = GFL99
instantiation = false
filament_flow_ratio = 0.98
filament_max_volumetric_speed = 12
slow_down_layer_time = 8
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180
{endif};Prevent PLA from jamming

[filament:OrcaArena Generic PLA Silk @base]
inherits = fdm_filament_pla
from = system
filament_id = GFA05
instantiation = false
filament_flow_ratio = 0.98
filament_max_volumetric_speed = 12
slow_down_layer_time = 8
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180
{endif};Prevent PLA from jamming

[filament:OrcaArena Generic PLA-CF @base]
inherits = fdm_filament_pla
from = system
filament_id = GFL98
instantiation = false
required_nozzle_HRC = 40
cool_plate_temp = 45
cool_plate_temp_initial_layer = 45
filament_flow_ratio = 0.95
filament_type = PLA-CF
filament_max_volumetric_speed = 12
slow_down_layer_time = 7
additional_cooling_fan_speed = 0
temperature_vitrification = 55
nozzle_temperature_range_low = 190
nozzle_temperature_range_high = 240
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180
{endif}

[filament:PolyLite PLA @base]
inherits = fdm_filament_pla
from = system
filament_id = GFL00
instantiation = false
filament_vendor = Polymaker
filament_cost = 25.4
filament_density = 1.24
filament_flow_ratio = 0.95

[filament:PolyTerra PLA @base]
inherits = fdm_filament_pla
from = system
filament_id = GFL01
instantiation = false
filament_vendor = Polymaker
filament_cost = 25.4
filament_density = 1.31
filament_flow_ratio = 0.98

[filament:OrcaArena Generic PVA @base]
inherits = fdm_filament_pva
from = system
filament_id = GFS99
instantiation = false
filament_flow_ratio = 0.95
filament_max_volumetric_speed = 16
slow_down_layer_time = 7
slow_down_min_speed = 10

[filament:Arena TPU 95A @base]
inherits = fdm_filament_tpu
from = system
filament_id = GFU01
instantiation = false
filament_vendor = Orca Arena
filament_density = 1.22
nozzle_temperature_initial_layer = 230
filament_cost = 41.99
nozzle_temperature = 230

[filament:OrcaArena Generic TPU]
inherits = fdm_filament_tpu
from = system
setting_id = GFSR99
filament_id = GFU99
instantiation = true
filament_max_volumetric_speed = 3.2
filament_start_gcode = ; filament start gcode
{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255
{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180
{endif}
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena ABS @Arena X1C]
inherits = Arena ABS @base
from = system
setting_id = GFSB00
instantiation = true
filament_max_volumetric_speed = 22
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle

[filament:Arena ABS @Arena X1C 0.2 nozzle]
inherits = Arena ABS @base
from = system
setting_id = GFSB00_00
instantiation = true
filament_max_volumetric_speed = 2
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena ABS @Arena X1C 0.8 nozzle]
inherits = Arena ABS @base
from = system
setting_id = GFSB00_01
instantiation = true
filament_max_volumetric_speed = 22
nozzle_temperature = 260
slow_down_min_speed = 10
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic ABS]
inherits = OrcaArena Generic ABS @base
from = system
setting_id = GFSB99
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic ABS @0.2 nozzle]
inherits = OrcaArena Generic ABS @base
from = system
setting_id = GFSB99_00
instantiation = true
filament_max_volumetric_speed = 2
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:OrcaArena Generic ASA]
inherits = OrcaArena Generic ASA @base
from = system
setting_id = GFSB98
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic ASA @0.2 nozzle]
inherits = OrcaArena Generic ASA @base
from = system
setting_id = GFSB98_00
instantiation = true
filament_max_volumetric_speed = 2
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PA-CF @Arena X1C]
inherits = Arena PA-CF @base
from = system
setting_id = GFSN00
instantiation = true
filament_max_volumetric_speed = 8
nozzle_temperature_initial_layer = 290
nozzle_temperature = 290
fan_max_speed = 30
fan_min_speed = 10
fan_cooling_layer_time = 5
full_fan_speed_layer = 2
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PAHT-CF @Arena X1C]
inherits = Arena PAHT-CF @base
from = system
setting_id = GFSN04
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena Support G @Arena X1C]
inherits = Arena Support G @base
from = system
setting_id = GFSS01
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PC @Arena X1C]
inherits = Arena PC @base
from = system
setting_id = GFSC00
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle

[filament:Arena PC @Arena X1C 0.2 nozzle]
inherits = Arena PC @base
from = system
setting_id = GFSC00_02
instantiation = true
filament_max_volumetric_speed = 1
nozzle_temperature = 260
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PC @Arena X1C 0.6 nozzle]
inherits = Arena PC @base
from = system
setting_id = GFSC00_01
instantiation = true
nozzle_temperature = 260
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle

[filament:Arena PC @Arena X1C 0.8 nozzle]
inherits = Arena PC @base
from = system
setting_id = GFSC00_00
instantiation = true
nozzle_temperature = 260
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PC]
inherits = OrcaArena Generic PC @base
from = system
setting_id = GFSC99
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PC @0.2 nozzle]
inherits = OrcaArena Generic PC @base
from = system
setting_id = GFSC99_00
instantiation = true
filament_max_volumetric_speed = 1
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PET-CF @Arena X1C]
inherits = Arena PET-CF @base
from = system
setting_id = GFST01
instantiation = true
slow_down_for_layer_cooling = 1
reduce_fan_stop_start_freq = 0
slow_down_min_speed = 10
slow_down_layer_time = 2
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PETG Basic @Arena X1C]
inherits = Arena PETG Basic @base
from = system
setting_id = GFSG00_01
instantiation = true
filament_max_volumetric_speed = 14
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle

[filament:Arena PETG Basic @Arena X1C 0.2 nozzle]
inherits = Arena PETG Basic @base
from = system
setting_id = GFSG00_00
instantiation = true
filament_max_volumetric_speed = 1
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PETG Basic @Arena X1C 0.8 nozzle]
inherits = Arena PETG Basic @base
from = system
setting_id = GFSG00_02
instantiation = true
filament_max_volumetric_speed = 16
fan_max_speed = 60
fan_min_speed = 20
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PETG-CF @Arena X1C]
inherits = Arena PETG-CF @base
from = system
setting_id = GFSG50_01
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PETG]
inherits = OrcaArena Generic PETG @base
from = system
setting_id = GFSG99
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PETG @0.2 nozzle]
inherits = OrcaArena Generic PETG @base
from = system
setting_id = GFSG99_01
instantiation = true
filament_max_volumetric_speed = 1
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:OrcaArena Generic PETG-CF @Arena X1C]
inherits = OrcaArena Generic PETG-CF @base
from = system
setting_id = GFSG50
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PLA Basic @Arena X1C]
inherits = Arena PLA Basic @base
from = system
setting_id = GFSA00
instantiation = true
filament_max_volumetric_speed = 21
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle

[filament:Arena PLA Basic @Arena X1C 0.2 nozzle]
inherits = Arena PLA Basic @base
from = system
setting_id = GFSA00_00
instantiation = true
filament_max_volumetric_speed = 2
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PLA Basic @Arena X1C 0.8 nozzle]
inherits = Arena PLA Basic @base
from = system
setting_id = GFSA00_01
instantiation = true
filament_max_volumetric_speed = 21
slow_down_min_speed = 10
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PLA Impact @Arena X1C]
inherits = Arena PLA Impact @base
from = system
setting_id = GFSA03
instantiation = true
filament_max_volumetric_speed = 23.2
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle

[filament:Arena PLA Marble @Arena X1C]
inherits = Arena PLA Marble @base
from = system
setting_id = GFSA07_00
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PLA Matte @Arena X1C]
inherits = Arena PLA Matte @base
from = system
setting_id = GFSA01
instantiation = true
filament_max_volumetric_speed = 22
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle

[filament:Arena PLA Matte @Arena X1C 0.2 nozzle]
inherits = Arena PLA Matte @base
from = system
setting_id = GFSA01_00
instantiation = true
filament_max_volumetric_speed = 2
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PLA Matte @Arena X1C 0.8 nozzle]
inherits = Arena PLA Matte @base
from = system
setting_id = GFSA01_01
instantiation = true
filament_max_volumetric_speed = 22
slow_down_min_speed = 10
compatible_printers = Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PLA Metal @Arena X1C]
inherits = Arena PLA Metal @base
from = system
setting_id = GFSA02
instantiation = true
filament_max_volumetric_speed = 21
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PLA Metal @Arena X1C 0.2 nozzle]
inherits = Arena PLA Metal @base
from = system
setting_id = GFSA02_01
instantiation = true
filament_max_volumetric_speed = 2
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PLA Silk @Arena X1C]
inherits = Arena PLA Silk @base
from = system
setting_id = GFSA05_01
instantiation = true
filament_max_volumetric_speed = 12
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PLA Silk @Arena X1C 0.2 nozzle]
inherits = Arena PLA Silk @base
from = system
setting_id = GFSA05_00
instantiation = true
filament_max_volumetric_speed = 2
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PLA Sparkle @Arena X1C]
inherits = Arena PLA Sparkle @base
from = system
setting_id = GFSA08_00
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PLA Tough @Arena X1C]
inherits = Arena PLA Tough @base
from = system
setting_id = GFSA09_02
instantiation = true
filament_max_volumetric_speed = 21
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena PLA Tough @Arena X1C 0.2 nozzle]
inherits = Arena PLA Tough @base
from = system
setting_id = GFSA09_00
instantiation = true
filament_max_volumetric_speed = 2
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena PLA-CF @Arena X1C]
inherits = Arena PLA-CF @base
from = system
setting_id = GFSA50_01
instantiation = true
filament_max_volumetric_speed = 15
nozzle_temperature_initial_layer = 230
nozzle_temperature = 230
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle

[filament:Arena PLA-CF @Arena X1C 0.8 nozzle]
inherits = Arena PLA-CF @base
from = system
setting_id = GFSA50_02
instantiation = true
filament_max_volumetric_speed = 18
nozzle_temperature_initial_layer = 230
nozzle_temperature = 230
compatible_printers = Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena Support W @Arena X1C]
inherits = Arena Support W @base
from = system
setting_id = GFSS00
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:Arena Support W @Arena X1C 0.2 nozzle]
inherits = Arena Support W @base
from = system
setting_id = GFSS00_00
instantiation = true
filament_max_volumetric_speed = 0.5
nozzle_temperature_initial_layer = 240
nozzle_temperature = 240
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:OrcaArena Generic PLA]
inherits = OrcaArena Generic PLA @base
from = system
setting_id = GFSL99
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PLA @0.2 nozzle]
inherits = OrcaArena Generic PLA @base
from = system
setting_id = GFSL99_00
instantiation = true
filament_max_volumetric_speed = 2
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180
{endif}
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:OrcaArena Generic PLA Silk]
inherits = OrcaArena Generic PLA Silk @base
from = system
setting_id = GFSL99_01
instantiation = true
filament_max_volumetric_speed = 7.5
filament_retraction_length = 0.5
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PLA-CF]
inherits = OrcaArena Generic PLA-CF @base
from = system
setting_id = GFSL98
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:PolyLite PLA @Arena X1C]
inherits = PolyLite PLA @base
from = system
setting_id = GFSL19
instantiation = true
filament_max_volumetric_speed = 15
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180
{endif}
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:PolyTerra PLA @Arena X1C]
inherits = PolyTerra PLA @base
from = system
setting_id = GFSL18
instantiation = true
filament_max_volumetric_speed = 22
filament_start_gcode = ; filament start gcode
{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255
{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180
{endif}
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PVA]
inherits = OrcaArena Generic PVA @base
from = system
setting_id = GFSS99
instantiation = true
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:OrcaArena Generic PVA @0.2 nozzle]
inherits = OrcaArena Generic PVA @base
from = system
setting_id = GFSS99_00
instantiation = true
filament_max_volumetric_speed = 0.5
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:Arena TPU 95A @Arena X1C]
inherits = Arena TPU 95A @base
from = system
setting_id = GFSU00
instantiation = true
filament_max_volumetric_speed = 3.6
compatible_printers = Orca Arena X1 Carbon 0.4 nozzle,Orca Arena X1 Carbon 0.6 nozzle,Orca Arena X1 Carbon 0.8 nozzle

[filament:PolyLite PLA @Arena X1C 0.2 nozzle]
inherits = PolyLite PLA @Arena X1C
from = system
setting_id = GFSL25
instantiation = true
filament_max_volumetric_speed = 1
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle

[filament:PolyTerra PLA @Arena X1C 0.2 nozzle]
inherits = PolyTerra PLA @Arena X1C
from = system
setting_id = GFSL24
instantiation = true
filament_max_volumetric_speed = 1
compatible_printers = Orca Arena X1 Carbon 0.2 nozzle